ABOUT PRODUCTS RESOURCES QUOTES/ORDERING  
1-800-762-2478   Facebook Twitter Twitter 


 Abrasion
 Adhesion
 Application
 Color/Gloss
 Density
 Dispersion
 Drum Handling
 Drying Time/Gelation
 Film Flaws
 Film Thickness
 Hardness
 Impact & Flexibility
 Lab Apparatus
 Measuring Instruments
 Moisture/Air/Temp.
 Optical Instruments
 pH & Conductivity
 Publications
 Surface Profile
 Surface Tension
 Viscosity
Home  >>  Products  >>  pH & Conductivity  >>  Surface Salt Test and CHLOR*TEST
CHLOR*TEST™ Surface Salt Test

An easier to use, more accurate field test than anything before.

Surface Salt Test CHLOR*TEST™* was developed for ease of use and to prevent outside and cross contamination. Offers consistent, safe and reliable testing results for chloride contamination.



TECHNICAL DATA USE MORE INFO VIDEO PRICE LIST
 

 

Technical Data

top
Technical Data
Measuring Range: 5 - 200 ppm
Sampling Time: 1.5 minutes
Color Change: Pink - White
Detectable Limit: 1 ppm
Storage Condition: In a cool and dark place, not exceeding 77°F (25°C )

 

Simple Four Step Process

top
  1. Pour CHLOR* EXTRACT™ into CHLOR* SLEEVE™.
  2. Peel off protective backing, pinch CHLOR* SLEEVE™ and adhere sleeve to surface to be tested.
  3. Massage extract against surface, then peel from surface.
  4. Insert glass titration tube into sleeve. Approximately 2 minutes later, a simple color change will identify the chloride level in both parts per million and micro grams per centimeter squared. Can be used on vertical, horizontal or overhead surfaces.
You can also insert shoelace into side holes of the box and tie it around waist or belt loops for hands-free testing.

 

Applications

top
  • Bridges
  • Aircraft
  • Mining facilities
  • Ships
  • Marine structures
  • Storage tanks
  • Cooling towers
  • Pipe lines
  • Power plants
  • Offshore rigs
  • Petrochemical plants
  • Pulp and Paper mills
  • Steel fabrication
  • Electronics

 

Correction for Ambient Conditions:

top

No temperature correction is necessary at the sample solution of 41°F (5°C) to 176°F (80°C)

Interferences
Coexistence of Bromide ion, lodide ion or Cyanide ion respectively with Chloride ion gives higher readings. Sulphide ion produces a brown stain and the coexistence with Chloride ion produces a brown stain in the bottom of the stained layer and gives higher readings. PH value within 3.5 to 11 does not affect the readings. Less than pH 3.5 or more than pH 11 gives higher readings.

Chemical Reaction in the Detector Tube: NaCl + Ag2CrO4 = AgCl

 

Video

top

 

Prices

top
Prices subject to change    Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only    Export orders require quotations - click here for a quote     For more info call us 1-800-762-2478 or 954-946-9454.
Item Number Item Prices
CD-1341 CHLOR*TEST™ Surface Salt Test Kit (5 individual tests) $100.00
CD-134150 CHLOR*TEST™ Surface Salt Test Bulk Pack (50 individual tests) 895.00
CD-1342 CHLOR*TEST™ “A” Abrasive Kit (4 individual tests) 78.00
CD-1343 CHLOR*TEST™ “W” Water Kit (5 individual tests) 85.00
CD-1344 CHLOR*TEST™ “C” Concrete Kit (4 individual tests) 110.00
* CHLOR*TEST is a registered trademark of CHLOR*RID International

 

 

 

CHLOR*TEST® "CSN Salts"

(Chloride/Sulfate/Nitrate Ion Tests for Surfaces)

CHLOR*TEST®

The revolutionary new method for testing salt contamination is the most accurate field test on the market today.

Most specifications do not address sulfates or nitrates because there has never been a sulfate or nitrate field test kit. Now there is a complete test kit available that tests all three salts. CHLOR*TEST "CSN Salts" offers the specifier the availability of trouble-free performance testings, in the field, for chlorides, sulfates, and nitrates with one extraction.

The CHLOR*TEST "CSN Salts" uses a unique patented extract solution, CHLOR*EXTRACT® to retrieve surface salt contamination. This special extract enhances retrieval rates, thereby increasing accuracy. The greater the retrieval rate, the more accurate the test results.

Surface sampling is simplified by use of the patented CHLOR*SLEEVE®. Sampling can be done overhead, vertically, horizontally or any angle with this device.




FEATURES | MORE INFO | VIDEO | PRICE LIST
 

 

Features

top
CHLOR*TEST® Case
  • EPA compliant - No need to select a low or high range. Meters range is 0-100ppm with auto ZEROING.

  • Digital direct readings with a large 3-1/2 digital display incorporation low-battery warning.

  • European CE Mark of compliance for electromagnetic compatibility and safety.

  • Quantitative results are achieved in minutes. Each kit contains (5) individual tests with new refill kits available.

 

Colorimeter Specifications

top
  • Water resistant design
  • Auto zero
  • Hinged light cover
  • Digital direct readings
  • European CL-Mark compliant
  • EPA Compliant
  • 9-volt power source (included)
  • Single wavelength
  • Photometric ±0.001 absorbancy
  • Accuracy ±1ppm
  • Low battery warning (BAT)
  • Overrange (Er2)
  • Burnt out bulb (Er3)

 

Video

top

 

Prices

top
Prices subject to change    Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only    Export orders require quotations - click here for a quote     For more info call us 1-800-762-2478 or 954-946-9454.
Item Number Item Prices
CD-1351 CHLOR*TEST "CSN Salts" Kit $1,400.00
CD-1353 Complete Refill Kit (5 Tests) 200.00
CD-135350 Complete Refill Kit (50 Tests) 1,800.00



top

Call HAVE QUESTIONS?
    1-800-762-2478
Email PREFER TO EMAIL?
    gardner@gardco.com
  FIND PRODUCTS LEARN MORE ORDERING INFO ABOUT US
  By Category Email Registry How to Order Contact Info
  By Industry Trade Shows Request Quote History
  New Products Test Lab Info Order Form FAQ's
  Monthly Product Articles/Links Sales & Clearance Policies




  © 2018 Paul N. Gardner Company, Inc. | Contact | Policies Facebook  Twitter  YouTube  Blogger