+1 (954) 946-9454

CHLOR TEST™ Surface Salt Test

Article No. 10840

Chlor*Test Abrasive/Chloride Ion 4/pk

  • Chlor-Test Kit abrasive chloride
  • Chlor*Test “A” detects chloride contamination on blast cleaning abrasive media
  • Uses ASTM D4940 principals, but offers the additional value of chloride ion specific measurements.
  • 4 pack

Select your model

$78.00 excl. taxes & shipping cost

Features

  • The CHLOR*TEST™ is a surface salt test that was developed for ease of use and to prevent outside and cross contamination
  • It offers consistent, safe and reliable testing results for chloride contamination. An easier to use, more accurate field test than anything before
  • Portable surface salt test
  • Easy to use
  • Prevents cross contamination
  • Reliable results
  • Applications: bridges, aircraft, mining facilities, ships, marine structures, storage tanks, cooling towers, pipe lines, power plants, offshore rigs, petrochemical plants, pulp and paper mills, steel fabrication, electronics
  • No temperature correction is necessary at the sample solution of 41°F (5°C) to 176°F (80°C)
  • Interferences - Coexistence of Bromide ion, lodide ion or Cyanide ion respectively with Chloride ion gives higher readings. Sulphide ion produces a brown stain and the coexistence with Chloride ion produces a brown stain in the bottom of the stained layer and gives higher readings. PH value within 3.5 to 11 does not affect the readings. Less than pH 3.5 or more than pH 11 gives higher readings. Chemical Reaction in the Detector Tube: NaCl + Ag2CrO4 = AgCl

Technical Attributes

  • Data
    Measuring Range:5 - 200 ppm
    Sampling Time:1.5 minutes
    Color Change:Pink - White
    Detectable Limit:1 ppm
    Storage Condition:In a cool and dark place, not exceeding 77°F (25°C )

Procedure

  1. Pour CHLOR* EXTRACT™ into CHLOR* SLEEVE™.
  2. Peel off protective backing, pinch CHLOR* SLEEVE™ and adhere sleeve to surface to be tested.
  3. Massage extract against surface, then peel from surface.
  4. Insert glass titration tube into sleeve. Approximately 2 minutes later, a simple color change will identify the chloride level in both parts per million and micro grams per centimeter squared. Can be used on vertical, horizontal or overhead surfaces.

You can also insert shoelace into side holes of the box and tie it around waist or belt loops for hands-free testing.

Delivery Content

Test kits include: titration tube snapper, strap, clip, pre-measured bottle of Chlor*Rid extract solution, sleeve, titration tube and operating instructions

Join our Email List. subscribe
CANCEL