Blue Spirit Thermometers

How to merge the interrupted indicator column when the liquid is located IN THE CONTRACTION CHAMBER

1. Heat up your thermometer at the bottom receptacle (for example with a lighter).
2. The indicator liquid must be pushed up carefully to the middle of the first expansion chamber in the process. 
   NOTE: Do not exceed this marking under any circumstances!
3. Now tap lightly on the thermometer with your finger at the height of the first expansion chamber.
4. The liquid should now have merged again.
5. Repeat the procedure if necessary.

How to merge the interrupted indicator column when the liquid is located ABOVE THE FIRST EXPANSION CHAMBER

1. Heat up your thermometer at the second expansion chamber (for example with a lighter).
   CAUTION: DO NOT EXCEED 200 °C!
   NOTE: This pushes the liquid downwards (into the cooler area).
2. The indicator liquid must be pushed to about the beginning of the second expansion chamber in the process.
3. Now please heat the thermometer at the bottom receptacle so that the filling liquid is pushed up again.
4. The liquid should now have merged again.
   NOTE: Residues of the liquid may not remain above the chamber
5. Repeat the procedure if necessary
   NOTE: Let the column cool down slowly in the case of thermometers with very narrow capillary openings!

How to eliminate a BLUE COLOUR FILM in the capillary

1. Heat up the capillaries at the point where the colour film is located (for example with a lighter).
   CAUTION: DO NOT EXCEED 200 °C!
2. Push the liquid column past the heated point.
3. Subsequently let the liquid column cool down slowly.
4. Repeat the procedure if necessary.

GENERAL NOTE: Draw special attention to thermometers with zero point. Please ensure that the column cools down slowly to avoid separation of the liquid.

IMPORTANT: The blue ACCU-SAFE liquid is non-toxic and eco-friendly. Should the thermometer break and emit the liquid, the liquid can simply be wiped up with a moist cloth and disposed of in the normal waste disposal.