
Minimum Temperature Film Forming Bar (MFFT)
Minimum Film Forming Bar (MFFT)
The Rhopoint Minimum Film Forming Temperature Bar (MFFT) is a self-contained bench top instrument used to determine the minimum film forming temperature and white point in paint and coatings such as water base coatings, polymer dispersions, synthetic latexes, and emulsion.
Select your Model
Enter a value between 1 and 100000000 in increments of 1.
excl. taxes & shipping cost
Minimum Film Forming Temperature (MFFT) is the lowest temperature at which a material forms a continuous film. The Rhopoint MFFT 90 provides a controlled temperature gradient across a nickel-plated copper platen, allowing operators to evaluate film formation across a range of temperatures in a single test.
Electronically controlled heating and cooling establish the selected temperature gradient, while built-in sensors monitor the platen temperature along its length. A hinged transparent cover provides thermal insulation and allows visual inspection of the sample throughout the test. Once the film-formation boundary is visible, the operator positions the cursor at that point and reads the corresponding temperature on the display.
- Overall operating range of −10°C to 90°C (14°F to 194°F)
- Ten preset temperature programs for different test ranges
- Touchscreen controls with a built-in operating guide
- Nickel-plated copper platen with electronically controlled heating and cooling
- Built-in sensors monitor temperature along the platen
- Movable cursor for identifying the film-formation boundary and reading its temperature
- Hinged transparent cover for thermal insulation and visual observation
- Audible and visual alarms warn of cooling-water supply failure
- Supports testing in accordance with ASTM D2354 and ISO 2115.
| Technical Data Chart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Data |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Air connector
Spare silica gel
Manual
"75µm (0.003"") cube applicator"
Manuals
- MFFT-90-Minimum-Temperature-Film-Forming-Manual.pdf
MFFT-90-Minimum-Temperature-Film-Forming-Manual.pdf

SS Applicator 75 & 150 Micron
Article No: 11346

SS Applicator 50 & 100 Micron
Article No: 11348

Drierite Absorbent
Article No: 13313

MFFT Chiller
Article No: 15572

Minimum Temperature Film Forming Bar (MFFT)
Article No: 15571