Microm II Imperial Film Applicators
Art. No.: 10535
Microm II Tefcrom/Blade, 7"
- Microm II Imperial (mils) Film Applicator
- 7" film width
- Cerakote coated side plates
- Cerakote coated blade
Caution: Do not wet or submerse micrometer heads.
Select your Model
Enter a value between 1 and 100000000 in increments of 1.
excl. taxes & shipping cost
- Knife-blade fitted into slots in the end section allows vertical adjustment of the blade.
- Two finely-made micrometer barrels that can be easily set so that gate clearances can be adjusted from 0-0.250” in increments of .001” with resolution to .0005”.
- Thimbles & barrels of the micrometers are dull chrome.
- The ends of the side plates also serve as ergonomic operator hand grips when drawing down wet films.
- Casting knife film applicator with patented magnetic blade attachment for easy cleaning - US Patent 7,930,991.
- Rare earth magnets hold blade firmly in place. (The 2" applicator does not utilize the rare earth magnets and only uses one non rotating spindle micrometer that is fixed to the blade via two set screws.)
- Ergonomic design facilitates fast and accurate drawdowns, and no springs to break, rust or get clogged.
- Two types of side plates available that provide large paint well:
- Standard side plates are made from special clear anodized aluminum
- Tefcrom side plates are Cerakote coated for lowest coefficients of friction against any solid. They are non-reactive and are great for films cast on thin substrates as it helps prevent tearing by minimizing friction with the substrate.
- Two types of blades are available:
- The standard blade is finely machined 400 series stainless steel.
- The Cerakote blade is coated with a tough, durable PTFE film that provides excellent non-stick properties which makes for easy cleaning and good corrosion resistance. It also makes the blade more durable with exceptionally good abrasion resistance.
- Mil Measurement - Used on the Imperial Microm film applicator, each graduation on the Thimble Scale equals 0.001 in. = 1 mil. The first visible number is 1 which is 0.001 in. = 1 mil, the second number is 2 which is 0.002 in. = 2 mils, etc. One complete revolution is 25 graduations = 0.025 in. = 25 mils. The first increment on the Sleeve Scale = 0.025 in. = 25 mils, the second increment on the Sleeve Scale = 0.050 in. = 50 mils, the third increment on the sleeve = 0.075 in. = 75 mils, etc.
- Special orders welcome
| Technical Data Chart | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Data |
| ||||||||||||||||||||||||||||
We need your approval
This content is provided by YouTube. By enabling this content, your personal data may be processed by the vendor and cookies may be set.
Accept
Cookie Banner powered by 
consentmanager.net
consentmanager.netMicrom II Tefcrom/Blade, 7"
Manuals
- Microm-II-Film-Metric-and-Imperial-Applicators-Manual.pdf
Microm-II-Film-Metric-and-Imperial-Applicators-Manual.pdf
Vacuum Plate S, black anodized, 9x12"
Article No: 3876
Vacuum Plate, Stainless Steel 9x12”
Article No: 3882
Drawdown Plate, Glass
Article No: 4262
Vacuum Plate, Aluminum 12x18”
Article No: 11205
Glass Drawdown Plate 14" X 16"
Article No: 11210
Microm II Tefcrom/Blade, 6"
Article No: 14243
Microm II Tefrcom, 4"
Article No: 10490
Microm II, 4”
Article No: 10488
Microm II Tefrcom, 12"
Article No: 10585
Microm II, 2”
Article No: 10476
Microm II Tefcrom/Blade, 4"
Article No: 10491
Microm II Tefcrom, 7"
Article No: 10534
Microm II, 6”
Article No: 10518
Microm II, 7“
Article No: 10532
Microm II Tefcrom, 5"
Article No: 10505
Microm II, 8”
Article No: 10545
Microm II, 10”
Article No: 10568
Microm II Tefcrom/Blade, 5"
Article No: 10506
Microm II Tefcrom, 8"
Article No: 10547
Microm II Tefcrom, 3”
Article No: 10481
Microm II Tefcrom, 2”
Article No: 10477
Microm II, 5“
Article No: 10503
Microm II, 12"
Article No: 10584
Microm II, 3”
Article No: 10479
Microm II Tefcrom, 10"
Article No: 10569
Microm II Tefcrom, 6"
Article No: 10521
