Microm II Digital Film Applicators
Art. No.: 10592
Microm II Digital, 12"/30.5 cm
- Digital Microm II Film Applicator
- 12"/30.5 cm film width
- Mils and Microns
- Standard anodized aluminum side plates
- Standard 400 series stainless-steel blade
Caution: Do not wet or submerse micrometer heads.
Select your Model
Enter a value between 1 and 100000000 in increments of 1.
excl. taxes & shipping cost
- Microm II Digital Film Applicator is a casting knife film applicator with a digital LCD display of measurements shown in both mils and microns.
- All digital models include spindle and lock feature to hold measurements in place
- 0.00005" (0.001mm) digital graduation
- Digital LCD display with inch and metric readout
- SPC output transmits results to a computer or external device through an interface cable (sold separately)
- Ingress Protection to IP65
- Satin chrome finish on thimble sleeve helps resist rust
- Metal Magnet bushing
- Knife-blade fitted into slots in the end section allows vertical adjustment of the blade
- The ends of the side plates also serve as ergonomic operator hand grips when drawing down wet films
- Two types of side plates available that provide large paint well:
- Standard side plates are made from special clear anodized aluminum
- Tefcrom side plates are Cerakote coated for lowest coefficients of friction against any solid. They are non-reactive and are great for films cast on thin substrates as it helps prevent tearing by minimizing friction with the substrate
- Two types of blades are available:
- The standard blade is finely machined 400 series stainless steel
- The Cerakote blade is coated with a tough, durable PTFE film that provides excellent non-stick properties which makes for easy cleaning and good corrosion resistance. It also makes the blade more durable with exceptionally good abrasion resistance
- Rare earth magnets hold blade firmly in place. (The 2" applicator does not utilize the rare earth magnets and only uses one non rotating spindle micrometer that is fixed to the blade via two set screws.)
- Casting knife film applicator with patented magnetic blade attachment for easy cleaning - US Patent 7,930,991
- No springs to break, rust or get clogged
- Extreme Accuracy
- Ergonomic design facilitates fast and accurate drawdowns
- Special orders welcome
| Technical Data Chart | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Data |
| ||||||||||||||||||||||||||||
https://www.youtube.com/watch?v=kdB5WR-D1yU
Microm II Digital, 12"/30.5 cm
Manuals
- Microm-II-Film-Digital-Applicator-Manual.pdf
Microm-II-Film-Digital-Applicator-Manual.pdf
Vacuum Plate S, black anodized, 9x12"
Article No: 3876
Vacuum Plate, Stainless Steel 9x12”
Article No: 3882
Drawdown Plate, Glass
Article No: 4262
Vacuum Plate, Aluminum 12x18”
Article No: 11205
Glass Drawdown Plate 14" X 16"
Article No: 11210
Microm II Dig. Cerakote Blade, 8”/20.3cm
Article No: 15254
Microm II Dig. Tefrcom, 7"/17.8 cm
Article No: 10543
Microm II Digital, 7"/17.8 cm
Article No: 10541
Microm II Dig. Tefcrom, 10"/25.4 cm
Article No: 10576
Microm II Digital, 5"/12.7 cm
Article No: 10513
Microm II Digital, 10"/25.4 cm
Article No: 10574
Microm II Dig. Tefrcom, 8"/20.3 cm
Article No: 10558
Microm II Digital, 8"/20.3 cm
Article No: 10556
Microm II Dig. Tefcrom/Blade 5"/12.7cm
Article No: 10517
Microm II Dig. Tefcrom, 5"/12.7 cm
Article No: 10516
Microm II Dig. Tefcrom, 6"/15.2 cm
Article No: 10530
Microm II Dig. Tefcrom, 4”/10 cm
Article No: 10500
Microm II Dig. Tefcrom/Blade, 4"/10.2cm
Article No: 10501
Microm II Dig. Tefcrom/Blade, 8”/15.2 cm
Article No: 10559
Microm II Dig. Cerakote Blade, 7”/17.8cm
Article No: 10544
Microm II Digital, 6"/15.2 cm
Article No: 10527
Microm II Dig. Tefrcom/Blade, 10”/25.4cm
Article No: 10577
Microm II Dig. Cerakote Blade, 4“/10.2cm
Article No: 10502
Microm II Digital, 4"/10.2 cm
Article No: 10497
Microm II Dig. Tefcrom/Blade, 6"/15.2cm
Article No: 10531
