Bresle Salt Contamination Detection Kit

Art. No.: 10846

Bresle Patch Salt Kit with Exstik Meter

Bresle Patch Salt Kit
ExStik II EC500 waterproof pH and conductivity meter, measures conductivity, TDS, Salinity, pH and Temperature using one electrode

Select your Model

pH, Conductivity and Refractometers

$507.00

QTY

Enter a value between 1 and 100000000 in increments of 1.

excl. taxes & shipping cost

The Bresle Salt Contamination Detection Kit is a conductometric determination of soluble salt contamination. It is essential that the level of contaminants on a surface is measured prior to coating in order to ensure the quality of the coating and that its optimum lifetime is achieved. If the coating is applied to a contaminated surface which is not properly prepared, it could fail prematurely resulting in costly re-coating and high maintenance costs. This is why the Bresle Salt Contamination Detection Kit is so important.

Reliable and accurate
It is easy to use and portable
In accordance with ISO 8502-6 and ISO/DIS 8502-9
Can prevent costly repair and need for recoating

Bresle Patch Salt Kit with Exstik Meter

Box of 25 Bresle Patches
Disp. Beaker 30ML Grad.
Syringe/NDL 10cc 21G 1"
Exstik
Bottle 500ML Distilled Water
Pair of Gloves

Manuals

Bresle-Salt-Contamination-Detection-Kit-Manual.pdfBresle-Salt-Contamination-Detection-Kit-Manual.pdf

Many inspectors have to test surfaces in accordance with ISO 8502-6 and ISO/DIS 8502-9, which specify tests using the Bresle Patch as the method of extracting the soluble salts from the test surfaces.

The Bresle Patch is adhered to the test surface and distilled water is pumped into the patch using a syringe.
The water is pumped between the patch and the substrate, which causes the soluble salts on the test surface to be dissolved into the water.