X-Cut Adhesion Gauge

Art. No.: 15359

X Cut Adhesion Gauge, Basic Kit

X-Cut gauge
Cutting tool
Protective storage case
Instructions

Select your Model

Adhesion Testers

$120.00

QTY

Enter a value between 1 and 100000000 in increments of 1.

excl. taxes & shipping cost

The X-Cut Template assesses the adhesion of coating films by applying and removing pressure sensitive tape over cuts that are made using a knife to cut through the film.
Determines whether the adhesion of a coating to a substrate is at an acceptable level.
It is designed to conform with ASTM D3359 (Method A) and ASTM D6677.
Typically used to perform adhesion testing on coating films greater than 5 mils.
Easy to use and has been used in industry for many years to provide valuable adhesion information.
The X-Cut Kit (15360) contains everything required to perform tape test adhesion test method ASTM D3359 (Method A).
The X-Cut gauge with cutting tool (15359) contains everything required to perform tape test adhesion method ASTM D6677.

We need your approval

This content is provided by YouTube. By enabling this content, your personal data may be processed by the vendor and cookies may be set.

Always accept YouTube

Cookie Banner powered by

consentmanager.net

Manuals

X-Cut-Adhesion-Gauge-Manual.pdfX-Cut-Adhesion-Gauge-Manual.pdf

ASTM Adhesive Tape for Adhesion Test from BYK-Gardner

Adhesive Tape for ASTM D3359

Article No: 8660

Price: $39.00

Adhesion Crossuut Test Knife Cutting Tool

Knife Cutting Tool for Temper 2

Article No: 12619

Price: $11.00

D-3359 ASTM Reprint

Article No: 12649

Price: $18.00

Adhesion Tape 90 yds x 1"- ASTM D3359

Article No: 15513

Price: $59.95

X Cut Adhesion Gauge

Article No: 15361

Price: $70.00

X Cut Adhesion Gauge, Advanced Kit

Article No: 15360

Price: $225.00

Rating	ASTM D6677 Rating System
10	Coating is extremely difficult to remove; fragments no larger than approximately 0.8 by 0.8 mm (1/32 in x 1/32 in.) removed with great difficulty.
8	Coating is difficult to remove; chips ranging from approximately 1.6 by 1.6 mm (1/16 by 1/16 in) to 3.2 by 3.2 mm (1/8 by 1/8 in.) can be removed with difficulty.
6	Coating is somewhat difficult to remove; chips ranging from approximately 3.2 by 3.2 mm (1/8 by 1/8 in.) to 6.3 by 6.3 mm (1/4 by 1/4 in.) can be removed with slight difficulty.
4	Coating is somewhat difficult to remove; chips in excess of 6.3 by 6.3 mm (1/4 by 1/4 in.) can be removed by exerting light pressure with the knife blade.
2	Coating is easily removed; once started with the knife blade, the coating can be grasped with ones fingers and easily peeled to a length of at least 6.3 mm (1/4 in.).
0	Coating can be easily peeled from the substrate to a length of greater than 6.3 mm (1/4 in.).