Q Nix 1500 Coating Thickness Gauge

QNix® 1500 Coating Thickness Gauges

Art. No.: 11041

QNix 1500 Coating Thickness Gauge

The QNix® 1500 combination coating thickness gauge, and a reliable companion in the automotive and corrosion protection area.

Select your Model

$1,096.00

Enter a value between 1 and 100000000 in increments of 1.

excl. taxes & shipping cost

  • Integrated Fe/NFe probe with wear-proof ruby tip for long-term use
  • Large measuring range of up to 5000 µm
  • Takes measurements of non-magnetic coatings on steel and iron as well as all isolating coatings on non-ferrous metals such as aluminum, copper, zinc
  • Readable duplex LCD display
  • Precise presentation of readings, battery condition, unit, mode and serial number
  • Readings displayed in µm or mil.
  • Flat design of this gauge allows for measurements at difficult-to-access points
  • Simple flexible use, even at wide stretching surfaces
  • High reliability and precision even in tough operating conditions.
  • No calibration, no change of probes
  • Automatic ON/OFF
  • No switching between measuring ranges required
  • Convenient one hand operation
  • Storage of last reading
  • V-groove for safe measurements on axles and rods
  • 9-Volt-Block battery for many thousands of measurements

Technical Data Chart
Data

Measuring Principle:		Two magnetic measuring principles:
Fe*: Magnetic-Flux/Hall Effect ref
NFe*: Eddy Current ref
Probe Type:Integrated
Measuring Ranges:Fe: 0.0 - 5000 µm
NFe: 0.0 - 5000 µm
Metric System µm/mil:Yes
Measuring Interval:Single measurement: 1250 ms
Display Metric Measuring Range:From 0 - 999 in µm, 1.00 - 5.00 mm
Resolution:1 µm in the measuring range 0.0 - 99.9 µm, 1 μm in the measuring range 100 – 999 μm, 0.01 mm in the measuring range 1.00 – 5.00 mm
Minimum Measuring Area:10 x 10 mm
Accuracy (according to Automation Dr. Nix Standards): 

± (1 μm + 2 %*) in the range 0.00 – 999 μm ± 3.5 %* in the range 1 – 5 mm (*) of reading

Minimum Curvature:Convex: 5 mm; Concave: 25 mm
Minimum Substrate Thickness:Fe: 0.2 mm
NFe: 0.05 mm
Display:Digital LCD
Temperature Range:0 - 50°C (32 - 122°F)
Permitted Storage Temperature:-10 - 60°C (14 - 140°F)
Power Supply:9V
Dimensions (L x W x H mm):6.5 x 2.5 x 1.3" (166 x 64 x 34 mm)
Weight Including Battery:Approx. 5.33 oz. (150 g)
* of the measurement
Fe* Measuring of non-ferroumagnetic coatings on ferromagnetic substrate, for example measuring on steel- or iron-substrates.
NFe* Measuring on non-ferromagnetic and electrically non-conductive coatings (insulating coatings) on non ferromagnetic and electrically conductive substrate, for example measuring on aluminum-, zinc-, brass-, and certain stainless (high grade) steel substrates.
QNix® 1500
Fe or Fe/NFe reference plate
9V alkaline battery
Test certificate
Operating instructions
Plastic case

Manuals