Re-Circulating Chiller Unit for MFFT

Re-Circulating Chiller Unit

Art. No.: 13303

Re-Circulating Chiller Unit for MFFT 100-240 Vac

The Re-Circulating Chiller is used with the MFFT and it is Plug and play,  simple to install and  no programming required.

Select your Model

$7,695.00

Enter a value between 1 and 100000000 in increments of 1.

excl. taxes & shipping cost

  • For use with Rhopoint MFFT
  • Ultra-compact design
  • 0.5kW at 20°
  • Simple Operation
  • Low cost of purchase and operation
  • Universal 90-264 VAC input voltage and 50/60Hz input frequency
  • Automatic overcurrent fault-cleared restart mode
  • Vapor compression technology
  • Brazed plate heat exchanger evaporator technology
  • Continuous running, duty settable, low temp fridge cutoff control methods

Technical Data Chart
Data
Physical Attributes
Physical Dimensions (LxWxH):435 x 180 x 380mm
Weight:Dry 20kg, wet 21kg
Noise level (dB(A)):64 (optional manual adjustment)
Cooling Capacity (Setpoint 20, ambient 20):0.5kW
Temperature Control Attributes
Duty at +20°C ambient, Setpoint +20°C (kW):500
Duty at +20°C ambient, Setpoint +15°C (kW):300
Refrigerant & Charge:R134a, 360g
Temperature Range (standard):+4°C to +35°C (Setpoint dependent on load)
Temperature Stability (with constant load):±0.1°C
Maximum THR (Total Heat Rejection):850W
Maximum Ambient Air Temperature:+35°C
Water Circuit Attributes:
System Volume (L):0.64
Pump Type:Sanso 24VDC brushless centrif pump 1.9bar(d/h) 3L/min (o/f)
Pump Capability:3.5L/min @1 bar
Standard Fittings:Pushfit 12mm
Standard Chemical Compatibility:Tap Water, DI-water
Electrical Attributes
115-230 Vac, (50-60 Hz):2A @ 115 Vac, 1A @ 230 Vac
Re-Circulating Chiller Unit for MFFT 100-240 Vac

Manuals