Coil Coater Wet Film Thickness Gauges
Coating Thickness Gauge CC 2-6 Mil
- Coil Coater Thickness Gauge
- 2-6 mils range
Select your Model
Enter a value between 1 and 100000000 in increments of 1.
excl. taxes & shipping cost
- Direct Reading
- High Precision
- Circular Type
- Standard Gauge For Testing Coil Coatings
- Meets ASTM D3794
These Coil coater gauges have an eccentric disk between two outer disks. This design is slightly different from the Gardco Model "C" wet film gauges that have the eccentric disk in front of the other two disks. (Reference leaflet "Model C Wet Film Thickness Gauge with Optional Handle".) The gauge is in the form of a wheel, the perimeter having three equally spaced disks. The center disk is smaller and eccentric to the outer ones. When the gauge is rolled over a wet film, the center disk will pick up material immediately when contact is made. The reading is taken from the point at which this contact first appears. For this purpose, a calibrated scale is engraved on one side of the gauge so it is possible to read film thickness with an accuracy of 0.0002".
| Technical Data Chart | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Data |
| ||||||||||||||||||
Manuals
- Coil-Coater-Wet-Film-Thickness-Gauges-Manual.pdf
Coil-Coater-Wet-Film-Thickness-Gauges-Manual.pdf
Inmont Gage Case
Article No: 14016
Gardco WFT Gauge Handle
Article No: 14048
Coating Thickness Gauge CC 4-8 Mil
Article No: 14034
