Drawdown Vacuum Plates

Art. No.: 11205

Vacuum Plate, Aluminum 12x18”

12x18 Vacuum Plate
Hard aluminum solid bar stock
Durable black anodization provides corrosion resistance and will increase longevity
Dual-zone capability

Select your Model

Paint Application

$1,286.00

QTY

Enter a value between 1 and 100000000 in increments of 1.

excl. taxes & shipping cost

This plate has a series of holes on the top and when connected to a vacuum pump or sink aspirator via hose a vacuum is created. It securely flattens paper draw down charts during application of wet coatings with any type of film for uniform film thickness results.

Economical platform to provide excellent drawdown results
Each plate comes complete with hose fitting and rubber footing
Optional chrome plated brass ball valves are required to control ports/zones, they have an easy on/off lever handle to enable or disable vacuum.

Technical Data Chart

Data

Surface Size:	30.5 x 45.7 cm (12 x 18 in)
Weight:	7.7 kg (17 lbs)
Dimensions L x W x H:	30.5 x 45.7 x 3.2 cm (12 x 18 x 1 in.)

Vacuum Plate, Aluminum 12x18”

Vacuum Plate
Rubber Footings
(2) Brass barbed fittings: (1) for 3/8 inch tubing, (1) “Y” fitting for 3/8 inch tubing
Nylon Y fitting

Manuals

Drawdown-Vacuum-Plate-Model-11205-Manual.pdfDrawdown-Vacuum-Plate-Model-11205-Manual.pdf

There are two ports on the side of the vacuum plate that select the two zones. The vacuum can be isolated to the 9x12 area or the full 12x18 area can be used under vacuum. If the 9x12 area is just required you would supply vacuum to one port, if the 12x18 area is desired you would use both. You have to apply vacuum to both ports to get the entire 12x18 area under vacuum.