Cylindrical Mandrel Tester from BYK-Gardner

Cylindrical Mandrel Tester

Art. No.: 1412

Cylindrical Mandrel Set, ASTM
Hand Bend Tester with multiple specific size mandrels

  • Rod diameters from 1/8 to 1.0 inch
  • Economical priced
  • V-shaped cuts to hold the mandrel in place during a test
  • Base is designed to store the rods

Select your Model

$997.00

Enter a value between 1 and 100000000 in increments of 1.

excl. taxes & shipping cost

Cylindrical mandrel testers evaluate a coating’s flexibility in regards to bending properties. A coated sheet metal is bent over a defined radius to evaluate elongation / adhesion as well as resistance to cracking.
The test procedure for elongation check is performed with fast speed (1s), while cracking is evaluated with slow speed (15 sec). The smaller the bend radius, the greater the material flexibility.
They are used in QC for simple Pass/Fail check or in R&D to determine the smallest mandrel size.

Two models are available:

  • Hand Bend Tester, a low cost solution with simple hand operation for Pass/Fail test according to ASTM D522.
  • Lever Bend Tester with operation using a lever for Pass/Fail test according to ISO 1519.

 

General
Weight2.3 kg
Weight5 lb
Dimensions: L x W x H30 x 18 x 18 cm
Dimensions: L x W x H12 x 7 x 7 in
Cylindrical Mandrel Set
Set of 9 stainless steel rods with dia. 1/8 in to 1.0 in
Frame
Manual

Manuals

Brochure

Cylindrical Mandrel Set from BYK-Gardner

Cylindrical Mandrel Set, ISO

Lever Bend Tester with multiple specific size mandrels

Article No: 5710

Price: $2,680.00