DY-206 Pull Off Adhesion Tester

DY-2 Adhesion Pull-Off Testing

Art. No.: 12661

Adhesion Dy-206 Pull-Off Tester, 6Kn

The Proceq™ DY-2 is an automated pull-off tester with an unmatched ease of operation and can store a complete record of the test. Pull-off testing is one of the most widely used test methods in the construction industry. It is indispensable for the diagnosis of structural damage to buildings as well as for checking complete renovation work.

Select your Model

$7,622.00

Enter a value between 1 and 100000000 in increments of 1.

excl. taxes & shipping cost

  • Constant load rate - One of the major influences on the result of a pull-off test is the operator influence in the application of a constant load rate. The DY-2 has integrated, feedback controlled motors that remove this variable completely, by providing a fully automated test at a constant load rate which can be verified.
  • Unique in parameter setting - The DY-2 is further unique in that it records every single test parameter required by the specification: Time and date of the test, test disc size, maximum load applied, automatic calculation of bond strength, applied load rate with graphical record, complete time of test as well as the failure mode. For the very first time, the operator is able to provide a complete record of the pull-off test, proving that the test was carried out in accordance with the applicable standard.
  • Complete report of load rate - DY-2 provides documentary proof that the test was actually carried out with the specified load rate. The load rate curve is saved along with the test results and may be downloaded to a PC for reporting, or it may also be viewed in real time if the DY-2 is connected to a PC during the test.
  • Failure mode reporting - Most pull-off testing standards require the operator to record the mode of failure. DY-2 is unique in that it allows this information to be saved along with the test result.
  • Range of test discs available - Depending on the application and material under test, the standards specify a range of test disc sizes.
  • Meets: ZTV-SIB 90 and calibrated according to EN ISO 7500-1 Class 1 and thereby exceeds the accuracy requirements specified in any of the standards listed.

Technical Data Chart
Data
Max Stroke:5mm
Calibration Accuracy:DY-206 EN ISO 7500-1 Class 2
Battery Capacity:1500 mAh, 3.75V (min. 80 measurements)
Memory Capacity:100 measurements
Charger Connection:USB type A (5V, 500mA)
Weight:9.92 lbs (4.5 kg)
Dimensions of Housing:4.29" x 9.45" x 8.10" (109 x 240 x 205.5 mm)
Operating Temperature:32 to 122°F (-10 to 50°C)
Storage Temperature:14 to 158°F (-10 to 70°C)
IP Classification:IP54
Tensile Force:0.6 - 6 kN / 135 - 1349 lbf
Test Disc Ø 50mm:0.3 - 3.1 MPa / 44 - 443 psi
Maximum Pulling Speed:4.65 mm/min 0.183 inch/min
Applications:Increased accuracy for low strength applications such as testing adhesive strength of mortars and renders
We need your approval
This content is provided by YouTube. By enabling this content, your personal data may be processed by the vendor and cookies may be set.
Accept
Cookie Banner powered by consentmanager.netconsentmanager.net
DY-206 Pull-Off Tester
Carrying case
Battery pack
Battery charger with USB cable
50mm aluminum test disc
M10 draw bolt
Torx screwdriver
DY-Link Software
Operating instructions
Calibration certificate

Manuals

DY Test Disc Bolt

Draw Bolt M10 Short For Dy-2 Series

Article No: 12662

Price: $73.00

DY Steel Test Disc

Steel Test Disc 50mm/M10

Article No: 12663

Price: $143.00

Dy-2 Adhesion Pull Off Adhesion Test Disc

Aluminum Test Disc 50x50 mm/M10

Article No: 12664

Price: $110.00