Taber Abraser Calibration Kit
Taber S-45 Wheel Tracking Cards
- Replacement wheel tracking cards are used with the Calibration Verification Kit to evaluate the tracking pattern of the S-30 WearTrac Wheels.
- These round carbonless cards include inside and outside wheel tracking bands and an area to record the test information.
Select your Model
Enter a value between 1 and 100000000 in increments of 1.
excl. taxes & shipping cost
Precision testing instruments, such as the Taber Rotary Platform Abraser, must be calibrated regularly to ensure accurate results. Although easy to operate, the Taber Abraser involves a complex interaction of critical components. An out of tolerance condition of one element can lead to significant differences in test results.
The Taber Abraser Calibration Kit, while not intended as a substitute for regular instrument calibration, is a reliable system check is useful to determine potential concerns and will identify if an instrument should be returned to an authorized facility for recalibration or repair prior to its scheduled calibration.
The kit includes instructions to perform inspections critical to the performance of the instrument, and allows the operator to monitor the following vital parameters: Wheel alignment Wheel tracking Bearing wear Vacuum suction force Table runout (requires dial indicator) Mass of accessory weights (requires scale).
S-30 Weartrac™ Precision Wheels (1 set), S-45 Wheel Tracking Cards (Pkg. 15), Dual Unit Vacuum Plug, Vacuum Test Gauge with Adaptor Caps & O-Ring Taber Abraser Clean-Up Hose
Taber S-45 Wheel Tracking Cards
Article No: 10037
Taber Rotary Abraser Calibration Kit
Article No: 10036
