+1 (954) 946-9454

QNix 9500 Accessories

Article No. 15122

Probe Fe 5 mm for QNix 5500/9500

Select your model

$560.00 excl. taxes & shipping cost

Features

  • The new QNix® standard probe is small and highly robust
  • Probe adaptor cable is sold separately made of drag chain compatible PUR 
  • The values listed for the probes indicate the max film thickness that they can measure
  • There are Fe-, NFe- and dual probes available
  • Stainless steel probe with a protective membrane, IP65 dust and water protection 
  • Resistant probe head with polished ruby 
  • Chemically resistant material, to clean with solvents (acetone, nitro dilution, ethanol) 
  • LED-limit indicator on the probe tip 
  • There is a digital copy of the last calibration certificate saved in each probe, which can be integrated into a report via PC software. 
  • All interchangeable standard probes of the QNix® 9500 are also compatible with the new QNix® 5500, thus ensuring a cross-model flexibility

Technical Attributes

  • Data
    QNix® 9500 Probes
    Status Display with RGB-LED on the Probe:yes
    Limit Display with RGB-LEDs on the Probe:yes
    Measuring Principle:magnetic: magnetic field amendment / hall-effect Fe / whirl current NFe
    Standards:DIN EN ISO 2808, DIN 50981, DIN 50984, ISO 2178, BS 5411 (3 & 11), BS 3900-C5, ASTM B 499, ISO 2360, ASTM D 1400, ASTM D 1186, ASTM D 7091
    Measuring Range:depending on the probe
    Measuring Speed (Measurements per Minute):≥ 120
    Accuracy of Measurement** on Fe Substrates Related to
    QNix® Reference Standards:
    ± (1 µm + 2 % of the reading) to 2.0 mm
    ± 3 % of the reading from 2.0 mm
    Accuracy of Measurement** on NFe Substrates Related to
    QNix® Reference Standards:
    ± (2 µm + 2 % of the reading) to 2.0 mm
    ± 3 % of the reading from 2.0 mm
    Smallest Measuring Surface Fe / NFe:Diameter 14.5 mm
    Smallest Curvature Konvex Fe:4 mm - Zero adjustment and 250 µm adjustment on original substrate (accuracy checked up to 250 µm) 6 mm - Zero point adjustment on original substrate (accuracy checked up to 250 µm)
    Smallest Curvature Konvex NFe:30 mm - Zero adjustment and 250 µm adjustment on original substrate (accuracy checked up to 250 µm) 50 mm - Zero point adjustment on original substrate (accuracy checked up to 250 µm)
    Minimum Thickness of Base Metal Fe:25 µm - Zero adjustment and 250 µm adjustment on original substrate (accuracy checked up to 250 µm) 100 µm - Zero point adjustment on original substrate (accuracy checked up to 250 µm)
    Minimum Thickness of Base Metal NFe:20 µm - Zero adjustment and 250 µm adjustment on original substrate (accuracy checked up to 250 µm) 50 µm - Zero point adjustment on original substrate (accuracy checked up to 250 µm)
    Mechanical Properties
    Material Casing Top:*Stainless steel V4A (1.4305)
    Material Casing Bottom:*Trogamid®
    Material Measuring Tip:*Ruby, polished (Al203)
    Dimensions (Height, Diameter):34.5 mm, 14.5 mm
    Weight:11.9 g
    Robustness / Environmental Conditions
    IP Protection:IP65
    Operating Temperature:-20 °C to +70 °C
    Storage Temperature:-20 °C to +70 °C
    Max. Surface Temperature:80 °C
    Max. Surface Temperature at 1s Measuring Time every 20s:100 °C
    * Clean with a damp cloth; is chemically resistant against acetone (except soft rubber parts e.g. keyboards or rubber protective frame), nitro dilution and ethanol
    ** An accurate measurement can vary when external temperature is below -5 °C or above 65 °C, but not more than factor 2.

Delivery Content

probe and calibration certificate

Join our Email List. subscribe
CANCEL