QNix 5500 Accessories
Article No. 15073
QNix Fe Probe 200 mils/5 mm
All exchangeable standard probes of the QNix® 5500 can also be used in the new QNix® 9500. QNix® thus ensures the flexibility and compatibility of the new probes which are interchangeable between both models.
Features
The QNix® probes have been completely redeveloped: The standard probes are small and extremely robust. FE-, NFe- and dual probes with different measuring ranges are available. The coating thickness gauge QNix® 5500 is available with a fixed integrated probe and a modular, exchangeable probe. QNix® 5500 changeable probes:
- Stainless steel probes with a protective membrane IP65 dust and splash water protection
- Rough measuring head with polished ruby
- Chemical resistant material for cleaning with solvents (acetone, nitro dilution)
- Probe adaptor cable made of drag chain compatible PUR
Technical Attributes
-
- Data
-
Technical Data Status Display with RGB-LED on the Probe: yes Measuring Principle: magnetic: magnetic field amendment / hall-effect Fe / whirl current NFe Standards: DIN EN ISO 2808, DIN 50981, DIN 50984, ISO 2178, BS 5411 (3 & 11), BS 3900-C5, ASTM B 499, ISO 2360, ASTM D 1400, ASTM D 1186, ASTM D 7091 Measuring Range: depending on the probe Measuring Speed (Measurements per Minute): ≥ 120 Accuracy of Measurement on Fe Substrates Related to
QNix® Reference Standards:± (1 µm + 2 % of the reading) to 2.0 mm
± 3 % of the reading from 2.0 mmAccuracy of Measurement on NFe Substrates Related to
QNix® Reference Standards:± (2 µm + 2 % of the reading) to 2.0 mm
± 3 % of the reading from 2.0 mmSmallest Measuring Surface Fe / NFe: Diameter 14.5 mm Smallest Curvature Konvex Fe: 6 mm - Zero point adjustment on original substrate (accuracy checked up to 250 µm) Smallest Curvature Konvex NFe: 50 mm - Zero point adjustment on original substrate (accuracy checked up to 250 µm) Minimum Thickness of Base Metal Fe: 100 µm - Zero point adjustment on original substrate (accuracy checked up to 250 µm) Minimum Thickness of Base Metal NFe: 50 µm - Zero point adjustment on original substrate (accuracy checked up to 250 µm) Material Casing Top:* Stainless steel V4A (1.4305) Material Casing Bottom:* Trogamid® Material Measuring Tip:* Ruby, polished (Al203) Dimensions (Height, Diameter): 34.5 mm, 14.5 mm Weight: 11.9 g IP Protection: IP65 Operating Temperature: -20 °C to +70 °C Storage Temperature: -20 °C to +70 °C Max. Surface Temperature: 80 °C Max. Surface Temperature at 1s Measuring Time every 20s: 100 °C * Clean with a damp cloth; chemically resistant against acetone (except soft rubber parts e.g. keyboards or rubber protective frame), nitro dilution and ethanol