+1 (954) 946-9454

Certified Coating Thickness Standards

Article No. 11220

Gardco Certified 3 Pc Std Set - Fe

  • Certified Fe Thickness Standard Set
  • 3 piece set
  • Ferrous measurement

Select your model

$477.00 excl. taxes & shipping cost


  • The Certified Coating Thickness Standards come in your choice of two sets. Both sets have a ferrous or non-ferrous option.
  • Area of Measurement 8mm diameter centered on the white exposed area
  • Calibrated slip gages measured & NATA/NAMAS/NIST certified
  • Calibrated in a NATA registered laboratory using International Standards traceable to NAMAS, NIST Certified traceable
  • These Coating Thickness Standards should be compared with calibration blocks, or slip gages, every twelve (12) months

Technical Attributes

  • Data
    Area of Measurement:8mm diameter
    Uncertainty:±0.25μm up to 6000μm and ±0.40μm from 6000μm to 12500μm at a confidence level of 95%
    Substrate Type:Non-Ferrous = Aluminum; Ferrous = Mild Steel
    Substrate Surface Finish:Surface ground then polished to 2μm

Delivery Content

The 3 Pc set has one Zero plate, one standard that has a nominal value of .8 mils (20.32 microns) and one that has a nominal value of 3.5 mils (88.9 microns)

Join our Email List. subscribe