Microm II Metric Film Applicators
Art. No.: 14242
Microm II Tefcrom, 7.6 cm
- Microm II Metric (microns) Film Applicator
- 7.6 cm film width
- Cerakote coated side plates
- Standard 400 series stainless-steel blade
Caution: Do not wet or submerse micrometer heads.
Select your Model
Enter a value between 1 and 100000000 in increments of 1.
excl. taxes & shipping cost
- Knife-blade fitted into slots in the end section allows vertical adjustment of the blade.
- Two finely-made micrometer barrels that can be easily set so that gate clearances can be adjusted from 0-6.35 mm in increments of 10 microns with a resolution to 5 microns.
- Thimbles & barrels of the micrometers are dull chrome.
- Ergonomic design facilitates fast and accurate drawdowns, with no springs to break, rust or get clogged.
- The ends of the side plates also serve as ergonomic operator hand grips when drawing down wet films.
- Casting knife film applicator with patented magnetic blade attachment for easy cleaning - US Patent 7,930,991.
- Rare earth magnets hold blade firmly in place. (The 2" applicator does not utilize the rare earth magnets and only uses one non rotating spindle micrometer that is fixed to the blade via two set screws.)
- Two types of side plates available that provide large paint well:
- Standard side plates are made from special clear anodized aluminum
- Tefcrom side plates are Cerakote coated for lowest coefficients of friction against any solid. They are non-reactive and are great for films cast on thin substrates as it helps prevent tearing by minimizing friction with the substrate.
- Two types of blades are available:
- The standard blade is finely machined 400 series stainless steel.
- The Cerakote blade is coated with a tough, durable PTFE film that provides excellent non-stick properties which makes for easy cleaning and good corrosion resistance. It also makes the blade more durable with exceptionally good abrasion resistance.
- Micron Measurement - Used on the Metric Microm film applicator, each graduation on the Thimble Scale is 0.01 mm, the first visible number is 5 which is 5 graduations = 0.05 mm = 50 microns. One complete revolution is 50 graduations which is 0.50mm = 500 microns. The first increment on the Sleeve Scale is .50 mm = 500 micron, the second increment on the Sleeve Scale is 1 mm = 1000 microns, etc.
- Special orders welcome
| Technical Data Chart | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Data |
| ||||||||||||||||||||||||||||
We need your approval
This content is provided by YouTube. By enabling this content, your personal data may be processed by the vendor and cookies may be set.
Accept
Cookie Banner powered by 
consentmanager.net
consentmanager.netMicrom II Tefcrom, 7.6 cm
Manuals
- Microm-II-Film-Metric-and-Imperial-Applicators-Manual.pdf
Microm-II-Film-Metric-and-Imperial-Applicators-Manual.pdf
Vacuum Plate S, black anodized, 9x12"
Article No: 3876
Vacuum Plate, Stainless Steel 9x12”
Article No: 3882
Drawdown Plate, Glass
Article No: 4262
Vacuum Plate, Aluminum 12x18”
Article No: 11205
Glass Drawdown Plate 14" X 16"
Article No: 11210
Microm II Tefcrom/Blade, 17.8 cm
Article No: 10540
Microm II Tefcrom, 17.8 cm
Article No: 10539
Microm II, 30.5 cm
Article No: 10590
TEFCROM APPL 5.1cm PATH
Article No: 10478
Microm II, 25.4 cm
Article No: 10573
Microm II, 7.6 cm
Article No: 10485
Microm II, 12.7 cm
Article No: 10511
Microm II Tefcrom, 20.3 cm
Article No: 10550
Microm II Tefcrom/Blade, 7.6 cm
Article No: 10486
Microm II Tefcrom/Blade, 20.3 cm
Article No: 10551
Microm II Tefcrom, 15.2 cm
Article No: 10525
Microm II, 10.2 cm
Article No: 10495
Microm II, 20.3 cm
Article No: 10548
Microm II, 15.2 cm
Article No: 10524
