+1 (954) 946-9454

Pensky-Martens Closed Cup Flash Point Tester

Article No. 11476

Pensky-Martens Electric Flash Point Test

  • Electrically heated model is equipped with a 1000W nickel-chromium heater with stepless variable control for accurate, repeatable temperature rate of rise settings per specifications.
  • Heater unit is enclosed in a stainless steel housing with cooling vents. Includes line cord receptacle and switch for accessory slow speed stirrer.
  • 115 Voltage

Select your model

$5,999.00 excl. taxes & shipping cost

Features

  • Used for the flash point determination of fuels, lubricating oils, liquids containing suspended solids and liquids that tend to form a surface film during testing.
  • Determines flash points of a wide range of products by a closed cup method with two option speed stirring of the sample.
  • Extensively used in shipping and safety regulations for detection of contamination by volatile and flammable materials in fuel oils and lubricating oils, and for characterization of hazardous waste samples.
  • Smooth operating cover mechanism slides shutter open and applies test flame at the turn of a knob.
  • Cover fits over brass test cup and includes pilot flame, test flame reference bead, built-in stirrer and plated brass thermometer ferrule.
  • Requires a stirrer/motor accessory. Order Stirrer motor and thermometers separately.
  • Require a gas regulator and an external source of flame ie: propane/butane bottle or bbq tank (not supplied), as per the ASTM methods.
  • Mounted on a sturdy cast iron base.

Technical Attributes

  • Data
    Length x Width x Height, in.(cm):9.5 x 8 x 22.5 (24 x 20 x 57)
    Net Weight:K16000: 21 lbs (9.5kg)
    K16203/K16273: 24 lbs (10.9kg)
    Conforms to the Specifications:ASTM D93; AASHTO T73-811; IP 34; ISO 2719; DIN 51758; FTM 791-1102;
    NF M 07-019
    Electrical Requirements:115V 60Hz, Single Phase, 6.5A
    220-240V 50/60Hz, Single Phase, 3.4A
    Shipping Information:Shipping Weight: 30 lbs (13.6kg)
    Dimensions: 3.1 Cu. ft.

Standards

Conforms to ASTM D93, CE Marked

Delivery Content

Brass Test Cup with Handle, Thermometer Holder, Cover Assembly -  (Stirrer motor required, sold separately)

Join our Email List. subscribe
CANCEL