+1 (954) 946-9454

PosiTector 6000 High-Range Probes

Article No. 14997

Probe FNGS, High-Range Cable, 0-2.5”

The Positector 6000 High-Range Probes are ideal for thick protective coatings, such as epoxy, rubber, concrete liners, intumescent fireproofing, ship hull coatings (FNGS) and more.

Select your model

$1,510.00 excl. taxes & shipping cost

Features

  • Models include the FTS, FTRS, FKS, NKS and FNTS
  • The FTRS has a 90° angle
  • The FJS and FLS are ideal for steel
  • The FLS and FNGS have a braided stainless steel cable - kink-proof, wear and cut resistant are compatible with PosiTector bodies with serial numbers greater than 700,000 and the new PosiTector SmartLink.
  • FJS Probe is lightweight with an ergonomic design - 66% smaller than comparable probes. Its electro-magnetic probe is less susceptible to the effects of substrate roughness, curvature, material, and alloy.
  • The FLS Probe measures up to 38 mm (1.5 inches) and includes hard shell case and 19 mm (750 mil) shim
  • The FNGS Probe measures very thick coatings on ALL metals, non-conductive coatings on both ferrous and non-ferrous metal substrates. It measures up to 63.5 mm (2.5 inches), has a long-lasting, low wear probe face to facilitate scanning of large surfaces, and includes a handle for easy one-handed operation, a set of traceable coating thickness standards, instruction card.

Technical Attributes

  • Data
    Probe ModelFTSFTRSFNTSFKSNKSFJSFLSFNGS
    Substrates:FerrousFerrousFerrous / Non-ferrousFerrousNon-FerrousFerrousFerrousFerrous / Non-Ferrous
    Range:0 - 250 mils
    (0 - 6 mm / 0 - 6000 µm)
    0 - 500 mils
    (0 - 13 mm)
    0 - 1.0 in.
    (0 - 25 mm)
    0 - 1.5 in.
    (0 - 38 mm)
    0 - 2.5 in. (0 - 63.5 mm)


    Accuracy:
    ±(0.5 mils + 1%) 0 - 100 mils
    ±(0.5 mils + 3%) > 100 mils

    ±(0.01 mm + 1%) 0 - 25 mm
    ±(0.01 mm + 3%) > 2.5 mm
    ±(1 mils + 3%) 0 - 500 mils

    ±(0.02 mm + 3%) 0 - 13 mm
    ±(0.01 mils + 3%)
    ±(0.2 mm + 3%)
    ±(0.01 in. + 3%)
    ±(0.2 mm + 3%)
    ±(0.01 in. + 3%)
    ±(0.2 mm + 3%)
    Calibration Standards:P1P5P2P8
    Minimum Surface Area:-3.23 x 3.25 in. (83 x 83 mm)10 x 10 in. (254 x 254)
    Minimum Substrate Thickness:-0.1 in. (2.5 mm)0.2 in. (5 mm)
    Weight:-0.8 lb. (0.4 kg)
    Accuracies are stated as a fixed value plus a percentage of the gage's actual reading
Join our Email List. subscribe
CANCEL