These circulators will convert your existing liquid bath or an unheated bath or container into a precision temperature controlled bath with an exceptional thermal performance and offer a full range of options such as external circulation or digital set/ readout, high pump output and RS232 interface.

TE-10D - Stability ±0.01°C
This digital unit offers a temperature range of between -40°C *to +120°C. There is a digital temperature selector, circulating pump with external circulation connections, adjustable over-temperature cut-out and low liquid level cut-out.

Designed to be used with any Techne (or any clip-on) thermoregulator, these baths incorporate attractive carrying handles for added safety.

The four smaller models have seam free stainless steel inners for easy cleaning. The largest bath, the B-48, is of welded construction.

All baths have stoved enamel steel outer cases and a bridge mounting plate. Insulated baths can be supplied to order.

Flat and Gabled Lids
A wide range of flat and gabled lids are available to fit all sizes of constant temperature baths. These enclose the open bath to provide a safe working environment. They also reduce heat and evaporative losses. Gabled lids provide extra working headroom, and their pitched tops direct condensate back into the bath.

Cooling Coil
Connected to the main water supply, the cooling coil helps maintain temperature when bath temperature is near ambient. It is recommended for use when the bath operating temperature is within 5°C of ambient. Water circulated through the coil should be at least 5°C cooler than the bath temperature. (Standard with 20-HT systems)

Shown with Circulator (not included)

When paired with an immersion circulator these baths are a complete refrigerated circulating system for open or closed applications for temperature ranges from -20°C to 100°C. 7 liter bath capacity.

Temperature control is by the thermoregulator (TE-10A/TE-10D), giving two different combinations.

• Circulating bath with built in refrigeration
  
• Temperature range -20°C TO 100°C
  
• 7 liter bath capacity

The Flow Coolers work in conjunction with either a Techne thermoregulator or circulating system, they continually extract heat from the bath fluid by means of the heat exchanger which is built into the unit.

The cooling head of the Techne Dip Coolers fit neatly and unobtrusively into the corner of the bath and can be secured with a specially designed mounting bracket. Even if cooling can be achieved by cold tap water, a dip cooler is recommended as it conserves water and is easier and more convenient to use.

Flasks and other glassware can be removed from and returned to the bath with only a momentary disturbance of the blanketed surface. Bath temperature can be taken with ease and the floating blanket can improve the workplace environment by minimizing fumes, odors and splashing.

• Plastic Balls Floating Insulation Instead of Rigid Covers
• Reduce heat and evaporative losses
• Stabilize bath temperatures
• Minimize splashing, odors and fumes
• Improve workplace environment