ABOUT PRODUCTS RESOURCES QUOTES/ORDERING  
1-800-762-2478   Facebook Twitter Twitter 


 Abrasion
 Adhesion
 Application
 Color/Gloss
 Density
 Dispersion
 Drum Handling
 Drying Time/Gelation
 Film Flaws
 Film Thickness
 Hardness
 Impact & Flexibility
 Lab Apparatus
 Measuring Instruments
 Moisture/Air/Temp.
 Optical Instruments
 pH & Conductivity
 Publications
 Surface Profile
 Surface Tension
 Viscosity
Home  >>  Products  >>  Application  >>  Compressed Air Test Kit
Quality Compressed Air Test Kit

Quality Compresses Air Test Kit

If your air system is contaminated, you’re ruining paint job after paint job. Those resprays are coming right off your profits. The QAT (Quality Air Test) Kit could be the biggest money saver you’ll ever invest in.

The QAT Kit allows you to perform on-site analysis of your compressed air with immediate results. Clean compressed air is a must in the industrial and automotive paint industries. Water, oil, and/or particulates will ruin a quality paint system or an expensive air tool.




FEATURES TECHNICAL DATA USE PRICE LIST
 

 

Features

top

The QAT Kit comes in a shatter proof, air tight case, and includes one high density light, 30X Microscope with stand, a case of ten .2 micron filter membranes, a membrane holder with adjustable psi flow gauge and a quick disconnect nipple.

This QAT Kit is simple to use. It requires a short test period, and it will provide you with on-site results. It’s a small investment considering the money you’ll save eliminating bad paint jobs. To solve a negative test result, ask about the TS-3 Coalescer Filtration Products.

 

Technical Data

top
Technical Data Possible Results
Clear Liquid  - Water

Brown or Black Metal
Conglomerations - Rust

Yellow Stain  - Oil
Black Rubber Pieces  - Rubber Hose Fragments

 

Instructions for Use

top
  1. Turn air pressure down to 20 psi.
  2. Open filter holder and remove the rubber gasket.
  3. Place a white filter in the holder. (Note: Not the blue tinted paper.)
  4. Place rubber gasket on top of the filter.
  5. Tighten top of holder slowly so the filter does not twist. (Note: Do not over tighten.)
  6. Place assembly where the paint gun would connect. (Note: The air will exhaust from the back side.)
  7. Length of test depends on the application. The test should run for 15 minutes at the least. If possible, run the test for up to an hour.
  8. Remove from air line. Remove top of the filter holder and the rubber gasket.
  9. Place the 30X Microscope on the white filter inside the filter holder. Use the light to help identify contaminate.

 

Prices

top
Prices subject to change    Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only    Export orders require quotations - click here for a quote     For more info call us 1-800-762-2478 or 954-946-9454.
Item Number Item Prices

One high density light, 30X Microscope with stand, a case of ten .2 micron filter membranes, 2 AA batteries installed, a membrane holder with adjustable psi flow gauge and a quick disconnect nipple.
SQ-9010 Quality Compressed Air Kit $349.00
SQ-9021 Replacement filters (20/pk) 34.95
SQ-9025 30X Microscope Replacement 39.95



top

Call HAVE QUESTIONS?
    1-800-762-2478
Email PREFER TO EMAIL?
    gardner@gardco.com
  FIND PRODUCTS LEARN MORE ORDERING INFO ABOUT US
  By Category Email Registry How to Order Contact Info
  By Industry Trade Shows Request Quote History
  New Products Test Lab Info Order Form FAQ's
  Monthly Product Articles/Links Sales & Clearance Policies




  © 2019 Paul N. Gardner Company, Inc. | Contact | Policies Facebook  Twitter  YouTube  Blogger