LAQUAtwin Compact Water Quality Meter
Article No. 15014
Laquatwin Meter w/Electrode
The LAQUAtwins are compact water quality meters that can read pH, conductivity, ions and salinity. They can accurately display readings from only a single drop, in a few seconds. They can be calibrated, measure at the touch of a button and are fully waterproof and dustproof (IP67 rated).
Features
- Easy measurement for all users
- IP67 rated waterproof and dustproof.
- Sensor is easily replaceable
- Strap hole allows you to attached strap or tag
- Simple to use
- Auto calibration made easy with one button, complete when mark stops flashing
- Stability mark lights up when measurement is complete
- Temperature alarm flashes when temp is out of range
- Voltage measurment mode displays voltage
- Measurement value flashes when the measurement calue is out of range
- Measurement mark stops flashing when measurement is complete
- Sensor guard protects sensor
- Measurement Methods:
- Drops -Drop a sample with a pipette, small volume as 0.1mL can be measured. Using sampling sheet B (optional), volumes down to 0.005 mL can be tested.
- Immersion - When you're in the lab, you can test the sample in a beaker. Ensure the sensor guard sliding cap is open.
- Scoop - Use as a scoop to test water e.g. from a river. Vertical scoop from a aquarium is also available with unique sensor guard.
- Wipe - The sampling sheet allows tiny trace volumes to be analyzed. For example, wipe off the surface of the skin with a sampling sheet soaked with pure water and measure.
- Solid Samples - Foods containing some moisture can be tested by placing a small piece directly onto the sensor.
- Powders - LAQUAtwin meters can also test dry powders. Simply place the powder sample onto the sensor and drop on a constant amount of pure water.
- Paper, textiles and films - To test sheets of paper and textiles, cut up the sample into small pieces and place directly onto the sensor. Drop on a constant amount of pure water.
Technical Attributes
-
- Data
-
Type: pH> Conductivity (EC)> Salt 11 EC> Sodium Ion
(NA+)>Calcium Ion
(Ca2+)>Model:> pH-22 B-771 B-721EC B-722 B-751 Measurement Principle:> Glass electrode method 2 AC bipolar 2 AC bipolar Ion electrode method Min Sample Volume:> 0.05 mL*2 or 0.1 mL more*2 0.12 mL or more 0.12 mL 0.05 mL *2, 0.3 mL or more Measurement Range:> 2 to 12 pH Conductivity:
0 to 19.9mS/cm
(0 to 1.99S/m)
Salt: 0 to 1.1%
TDS: 0to 9900 ppm0.0 - 100.0 g/L salinity 0.00 to 10.00% 23 to 2300 ppm (mg/L) (10-3 to 10-1 mol/L) 40 to 4000 ppm (mg/L) (10-3 to 10-1 mol/L) Calibration:> Three-point Two-point Accuracy*6:> ±0.1 pH ±2%F.S. ±1 digit (for each range)*7 ±10% of reading value ±20% of reading value Functions:> Temp compensation - Auto hold - IP67 Water/Dust proof *8 Salt/TDS Measurement - Temp conversion (2%/°C fixed) - Auto hold - IP67 Water/Dust proof *8 Auto stable Automatic Power Off (30 min) Temp Compensation - Auto hold - IP67 Water/Dust proof *8 Temp Compensation - Auto hold - IP67 Water/Dust proof *8 Operating Temp/Humidity:> 5 to 40°C, 85% or less in relative humidity (no condensation) Power:> CR2032 batteries (x2) Dims/Mass:> 164 mm x 29 mm x 20 mm (excluding projections) / Approx. 50g (meter only without batteries, B771 approx 45 g) 6.5" x 1.1" x 0.8" - *1 Special application packages for crop measurement (B-741) and soil measurement (B-742) are also available
- *2 Smaller amount (0.05 mL or more) can be measured with the sampling sheet B. (Please close the light shield cover. If a sample that contain particulate, please use "Sampling sheet holder" (sold Separately))
- *3 With soil/water sampling ratio of 1:5.
- *4 When the measured value is out of the measurement range, the displayed value blinks. It should be used only as a guide
- *6 Repeatability in measurement of a standard solution after calibration using it.
- *7 -±5 µS/cm (0 to 199 µS/cm) -±0.05 mS/cm (0.20 to 1.99 mS/cm) - ±5 mS/cm (20 to 199 mS/cm)
- *8 IP67: no failure when immersed in water at a depth of 1 meter for 30 minutes. But the product can not be used underwater.
Delivery Content
12873 - pH Meter (pH-22) - Meter, electrode, 14mL 7 Buffer, 14mL 4 Buffer, case
10869 - Conductivity Meter (B-771) - Meter, electrode, 14mL 1.41mS/cm standard, case
15014 - Salt 11 EC Meter B-721EC - Meter, electrode, 2 CR2032 batteries, 1 pipette, Instruction manual, Quick manual, 2 14mL Sodiumchloride Std. solutions, 14mL Conditioning solution, carry case
15098 - Sodium Ion Meter B-722 - Meter, electrode, 14mL 2000ppm, 14mL 150 ppm, case
15097 - Calcium Ion Meter B-751 - Meter, electrode, 14mL 2000ppm, 14mL 150 ppm, case