Bresle Salt Contamination Detection Kit
Article No. 10846
Bresle Patch Salt Kit with Exstik Meter
The Bresle Salt Contamination Detection Kit is a conductometric determination of soluble salt contamination. It is easy to use, reliable, portable and can help prevent costly repair.
Features
It is essential that the level of contaminants on a surface is measured prior to coating in order to ensure the quality of the coating and that its optimum lifetime is achieved. If the coating is applied to a contaminated surface which is not properly prepared, it could fail prematurely resulting in costly re-coating and high maintenance costs. This is why the Bresle Salt Contamination Detection Kit is so important.
- Reliable and accurate
- In accordance with ISO 8502-6 and ISO/DIS 8502-9
- Portable
- Can prevent costly repair and need for recoating
Procedure
Many inspectors have to test surfaces in accordance with ISO 8502-6 and ISO/DIS 8502-9, which specify tests using the Bresle Patch as the method of extracting the soluble salts from the test surfaces.
- The Bresle Patch is adhered to the test surface and distilled water is pumped into the patch using a syringe.
- The water is pumped between the patch and the substrate, which causes the soluble salts on the test surface to be dissolved into the water.
Delivery Content
(1) Box of 25 Bresle Patches with certificate, (1) Disp. Beaker 30ML Grad.,
(1) Syringe/NDL 10cc 21G 1", (1) Conductivity Meter of Choice: Horiba OR Exstik, (1) Bottle 500ML Distilled Water,
(1) Pair of Gloves
Accessories
10892
Bresle Patches w/Certificate 25/pk
$149.00
10848
Syringe and Needle 10cc 21G 1"
$5.00
10849
Rectangular Bottle 500ml Distilled Water
$21.00
10850
Disposable PP Beaker 30ml Graduated
$3.00
10869
Conductivity Meter w Cell and Standards
$398.00
Other Variations