Corrosion Test Chamber
Article No. 13031
Corrosion Test Chamber, Model SCCH20
- Corrosion Test Chamber SCCH20
- Price starting at $18,800.00
- 120V, 240V
- 9.3 ft3 (264 liters) Capacity
- Inside: 30" x 18" x 30" (76 x 45 x76 cm)
- Outside (closed lid): 50" x 28" x 48" (62" open) 127 x 72 x122 cm (158 open)
This FORM can help you design the Test Chamber you require
Features
Available in sizes ranging from 9.3 cu. ft. to 2,508 cu. ft., Singleton SCCH accelerated corrosion test chambers can be used for Salt Fog, CASS, Humidity, Water Fog and many other test methods.They are designed to provide the accuracy and flexibility necessary to meet today's demanding test methods. All Singleton testing chambers are easy to use and operate.
- Shell - Double wall, water jacketed design for accurate temperature control and stability.
- Lining - Oven cured, continuous polymer coated interior for maximum service life and corrosion resistance.
- Cover - Clear acrylic cover allows for full view of test specimens.
- Opti-Fog™ - Patented fog generation towers with baffling per ASTM B117.
- Humidifying Tower – Saturates incoming air supply with humidity to ensure accurate and stable operation. Low water sensor system for heater protection.
- Control System
- Individual temperature controls with selectable °C or °F units
- Exposure zone dry bulb
- Exposure zone wet bulb
- Humidifying tower
- Precision air regulator assembly
- 4” Certified Pressure Gauge, 0-30 psi
- Air flow meter, 0-50 scfh
- Individual temperature controls with selectable °C or °F units
- Solution Reservoirs – 10-gallon DI water and 24-gallon solution reservoirs with patented Level-Matic™ level control.
- Certification – Calibration traceable to NIST.
Technical Attributes
-
- Data
-
Model # SCCH20 SCCH21 SCCH22 Capacity 9.3 ft3 (264 liters) 18 ft3 (510 liters) 30 ft3 (850 liters) Inside Dimensions
Exposure Zone Depth30" x 18" x 30"
(76 x 45 x76 cm)36" x 24" x 36"
(92 x 61 x 92 cm)48" x 30" x 36"
(122 x 76 x 92 cm)Outside Dimensions
(cover closed)50" x 28" x 48" (62" open)
127 x 72 x122 cm (158 open)56" x 34" x 56" (74" open)
142 x 86 x142 cm (188 open)65" x 36" x 56" (78" open)
165 x 92 x 145 cm (198 open)Electical Requirements: 120V, 240V 120V, 240V 480V 240V, 240V-3ph or 480-3ph Temperature Range: Ambient to 120°F (±3°) / or 50°C (±2°) Humidifying Tower: Ambient to 140°F (±3°) / or 60°C (±2°) Humidity Range: Ambient to 100% Fog Rate: 1-3 ml/hr Supply Air Pressure: 40-120 psi maximum Supply Air Volume: 40-50 scfh @ 12-18 psi Drain: Access to floor drain Exhaust: Vent to the outside Warranty: One year limited warranty Utility Requirements City Water: All Should be made available with the use of a shutoff valve and hose arrangement in the test area near the unit. Up to 100 gallons needed at initial installation / start up Deionized Water
(ASTM D1193 Type IV):All Used for filling reservoirs and for electrolyte solution makeup (up to 6 gallons per day) Exhaust: SCCH20-22 1” npt Drain: All 1/2” npt Corrosion resistant piping (ie) PVC
More Information
- Standard Salt Fog Testing Start Up Package - Includes the necessary collector funnels with graduated cylinders, one 50lb bag of salt, and one specific gravity hydrometer. All items comply with ASTM B117. Also available as individual items (Included with purchase a new salt fog chamber)
- External Condensate Collection Package - Provides external sampling of fog condensate collection without opening chamber or interrupting test. Complete with two condensation collector assemblies mounted externally on stand and piped to collector funnels mounted in exposure zone.
- Flanged Access Ports - Allows access to specimens while under test. Industry standard 2", 3", 4", 6", and custom sizes available. Includes a bolted plastic cover to seal the port when not in use.
- Reverse Cover Opening - Control Panel and Humidifying Tower on left side of cover opening. Ideal for side-by-side placement or units facing each other.
- Insulated Shell - For operating temperature above 120° F. - 140° F, or SWAAT Testing. Interior protective lining. 1/8" thick semi-hard natural rubber.
- Ontario Hydro Wiring Package (Canada Only) - Wiring to conform to Ontatio Hydro Wiring Standards.
- Re-circulating Exhaust Condenser System - System condenses and collects chamber exhaust into a separate 24 gallon reservoir mounted on Level-Matic® stand. System is completely self-contained, no outside vent required.
- Drain Pump Out System - Convenient drain system when no floor drain is available. Connects chamber drain to an automatic condensate pump with tubing. Waste solution is then pumped to a 45 ga. drum with lid and drain that is mounted on a dolly with casters. Can be easily rolled to the nearest drain to empty.
- Humidity Test Package - Adds ASTM D2247 and ASTM B380 humidity testing capability.
- CALgrafix GUI interface Software - Allows connection to a PC for easy reporting and data export
Delivery Content
- Start Up Kit - 80cm2 condensate collection assemblies, (1) 50lb bag of salt, (1) specific gravity hydrometer, (1) package of five PTFE filter cloths, (2) support racks, (2) support bars, (1) 15-30° specimen tray.
- Leveling feet
- Fill and drain valves
Accessories