Thin Film Wet Thickness Gauge
Article No. 14050
Thin Film Wet Thickness Gauge
The Thin Wet Film Thickness Gauge is a high precision 1/10th to 4 Mil Range (2.5 to 100 Microns) comb style wet film coatings gauge.
Certificate:
Features
- Polished stainless steel thin film wet thickness gauge
- Has forty scale divisions from 0.0001” to 4 mils in 1/10 mil increments
- Easy to use and clean
- Note: Calibration is traceable to the U.S. National Institute of Standards and Technology and qualify under ANSI/NCSL Z540-1 as applicable & ISO 9000 (not included)
Standards
Complies WITH and exceeds ASTM D4414
Procedure
- The Thin Film Gauge consists of a flat, circular 1/16" thick stainless steel disc with forty machined notches around the periphery and below the rim surface.
- Roll the gauge across the surface in a perpendicular position to wet the numbered flat surfaces below the surface of the paint film. After rolling the gauge (or slightly rocking it when areas are small) inspect the notched faces. The wet film thickness lies between the highest not-wetted and wetted faces.
- When measurements are made on a clear coating, after rotation of the gauge over the wet film, dust talcum powder on the flat faces and then blow it off. Talc will adhere only to the wetted faces.
Accessories
14052
Leather Case For Precision Hot Cake
$29.00