+1 (954) 946-9454

Coil Coater Wet Film Thickness Gauges

Article No. 14030

Coating Thickness Gauge CC 2-6 Mil

The Coil Coater is a precision Wet Film Thickness Gauge with an available 2 - 6 mil Range Scale and 4 - 8 mil Range Scale, with smallest graduation 0.2 mils.

Select your model

$605.00 excl. taxes & shipping cost

Features

  • Direct Reading
  • High Precision
  • Circular Type
  • Standard Gauge For Testing Coil Coatings

These Coil coater gauges have an eccentric disk between two outer disks. This design is slightly different from the Gardco Model "C" wet film gauges that have the eccentric disk in front of the other two disks. (Reference leaflet "Model C Wet Film Thickness Gauge with Optional Handle".) The gauge is in the form of a wheel, the perimeter having three equally spaced disks. The center disk is smaller and eccentric to the outer ones. When the gauge is rolled over a wet film, the center disk will pick up material immediately when contact is made. The reading is taken from the point at which this contact first appears. For this purpose, a calibrated scale is engraved on one side of the gauge so it is possible to read film thickness with an accuracy of 0.0002".

More Information

Certification - Coil Coater gauges qualify for certification under ANSI/NCSL 2540-1 as applicable. These gauges are traceable to the National Institute of Standards and Technology and conform to ISO 9000 when calibration is certified.

Standards

ASTM D1212 - "Measurement of Wet Film Thickness of Paint, Varnish, Lacquer, and Related Products."

ASTM D3794 - "Standard Guide for Testing Coiled Coatings."  

ASTM D823 - "Producing Films of Uniform Thickness of Paint, Varnish, Lacquer, and Related Products on Test Panels."

ASTM D1005 - "Measurement of Dry Film Thickness of Organic Coatings."  

ASTM D 1186 - "Measurement of Dry Film Thickness of Non-Magnetic Coatings Applied to a Ferrous Base."  

ASTM D1400 - "Measurement of Dry Film Thickness of Nonmetallic Coatings of Paint, Varnish, Lacquers on a Non-Magnetic Base." 

ASTM E 376 - "Recommended Practice for Measuring Coating Thickness by Magnetic Field or Eddy Current (Electromagnetic Test Methods)."

FTMS 141A, Method 6141c - "Dry Film Thickness (Magnetic Type Gauges)."

FTMS 141A, Method 6183 - "Dry Film Thickness (Mechanical Type Gauges)"

Procedure

  1. The gauge is placed on a freshly coated surface at the high range position (6 mils/or 8 mils) and rolled in one direction for one half a revolution. It is then lifted and placed on another area with its high range in contact with the surface. It is then rolled in the opposite direction for one-half a revolution.
  2. Examination of the center disk will show positions at which pick-up has taken place and the scale will show wet film thickness at each point. For clear coatings, dust the center wheel with talc. Blow off talc. Talc will only adhere to wetted portion of disk. Read scale at end of wet point.
  3. Gardco Coil Coater IC type Thickness gauge is rolled over the film and the wet film thickness is read directly from the gauge. Accuracy of 0.0002".

Accessories

14020
Cert-Mil Scale Of IC Type Gage Herewith
$206.00
Join our Email List. subscribe
CANCEL