Fischer Calibration Standards
Article No. 14754
Phenolic Calibration Standard 80.0 mils
- Phenolic Calibration Standards
- 1.5” x 1.5” (38 x 38 mm)
- 80 mils / 2.03 mm Nominal Value
Features
These plastic shims aid in the calibration of thickness gages on ferrous or non-ferrous metallic substrates. Plastic shims can be used to calibrate on the actual test substrate.
The Fischer Calibration Shims, Foils and Standards are used for the correct measurement of coatings with Coating Thickness Gauges
Both mils and microns are stated on the foils, shims and standards
All foils, shims and standards are certified, serialized, and traceable to NIST or BAM
All ranges are approximate and will be as close as possible to your defined thickness
ISO 17025 Certification available
Technical Attributes
-
- Nominal Value
- 80 mils (2.03 mm)
-
- Shim Material
- Phenolic Calibration Standards
-
- Data
-
Item No. Nominal Value Range Precision Plastic Shim (Mylar Calibration Foils) 11244 0.22 mils (5.59 μm) 0.19 - 0.25 mils (4.83 - 6.35 μm) 7100 0.50 mils (12.7 μm) 0.40 - 0.60 mils (10.2 - 15.2 μm) 7101 0.90 mils (22.9 μm) 0.77 - 1.04 mils (19.6 - 26.4 μm) 11246 1.40 mils (35.6 μm) 1.26 - 1.54 mils (32.0 - 39.1 μm) 7102 2.00 mils (50.8 μm) 1.80 - 2.20 mils (45.7 - 55.9 μm) 11248 2.75 mils (69.9 μm) 2.40 - 3.05 mils (61.0 - 77.5 μm) 11250 3.75 mils (95.3 μm) 3.40 - 4.10 mils (86.4 - 104 μm) 7105 4.75 mils (121 μm) 4.25 - 5.20 mils (108 - 132 μm) 7106 6.75 mils (172 μm) 6.10 - 7.40 mils (155 - 188 μm) 7110 10.0 mils (254 μm) 9.00 - 11.0 mils (229 -279 μm) 11252 14.0 mils (356 μm) 13.0 - 15.0 mils (330 -381 μm) 7120 20.0 mils (508 μm) 19.0 - 21.0 mils (483 -533 μm) Phenolic Calibration Standards 11254 30 mils (760 μm) 24.0 - 36.0 mils (608 -912 μm) 7140 40 mils (1016 μm) 36.0 - 44.0 mils (914 - 1118 μm) 14754 80 mils (2.03 mm) 72.0 - 88.0 mils (1.62 - 2.44 mm) 11256 200 mils (5.08 mm) 180 - 220 mils (4.57 - 5.59 mm)
Other Variations