+1 (954) 946-9454

Certified Coating Thickness Standards

Article No. 11221

Gardco Certified 3 Pc Std Set - N Fe

The Certified Coating Thickness Standards come in your choice of two sets. Both sets have a ferrous or non-ferrous option.

Select your model

$477.00 excl. taxes & shipping cost

Features

  • Two sets available:
    • The 3 Pc set (11220, 11221) has one Zero plate, one standard that has a nominal value of .8 mils (20.32 microns) and one that has a nominal value of 3.5 mils (88.9 microns)

    • The 5 Pc set (11218, 11219) has one zero plate, one standard that has a nominal value of 2 mils (50.8 microns), 2nd standard that has a nominal value of 6 mils (152.4  microns), 3rd standard nominal value of 10 mils (254 microns) and a fourth standard that has a nominal value of 20 mils (508 microns)

  • Area of Measurement 8mm diameter centered on the white exposed area

  • Calibrated slip gages measured & NATA/NAMAS/NIST certified

  • Calibrated in a NATA registered laboratory using International Standards traceable to NAMAS, NIST Certified traceable

  • These Coating Thickness Standards should be compared with calibration blocks, or slip gages, every twelve (12) months

Technical Attributes

  • Data
    Area of Measurement:8mm diameter
    Uncertainty:±0.25μm up to 6000μm and ±0.40μm from 6000μm to 12500μm at a confidence level of 95%
    Substrate Type:Non-Ferrous = Aluminum; Ferrous = Mild Steel
    Substrate Surface Finish:Surface ground then polished to 2μm

Delivery Content

Three Peice Set consists of: One zero plate and Two coated plates in a vinyl wallet

Five Piece Set consists of: One zero plate, Four coated plates in a vinyl wallet

Join our Email List. subscribe
CANCEL