The Fischer MPO and MPOR Gauges measure the thickness of coatings over metals quickly and nondestructively using magnetic induction and Eddy current. They are compact, rugged, easy to use hand-held instrument with two large, easy to read backlit displays and integrated probe for single handed operation.
Features
Especially robust instrument design for reliable coating thickness measurements under harsh conditions
FP models with connected cable probe for easy measurement in hard-to-reach places
Ideal for paint, plating, powder, enamel, over ferrous substrates (i.e. steel or iron) and anodize, paint and powder over non-ferrous substrates (i.e. aluminum and stainless steel).
Easy handling via intuitive menu navigation and 2 illuminated displays
3-point support and conductivity compensation for repeatable measuring results even with oddly shaped samples
Measurement with tracking display for continuous surface sampling
Statistical information such as mean value and standard deviation
Memory for up to 1000 readings
MPOR models also include these features:
Automatically rotating displays for easy viewing of the measuring result
Memory for up to 10,000 readings
Pre-installed measuring modes for coating thickness measurement according to IMO PSPC or SSPC-PA2
USB interface for transmitting the readings and evaluation with FISCHER DataCenter software
Three types of gauges available:
Permascope - For coating thickness measurements of thin layers on steel and iron: like zinc, chrome, copper, paint, lacquer, or plastic coatings on steel, iron or cast iron, and for both smooth and rough surfaces.
Dualscope - For coating thickness measurements on steel and non-ferrous metals like zinc, chrome, copper, paint, lacquer, or plastic coatings on steel, iron or cast iron. Also paint, lacquer or plastic on aluminum, copper or brass, anodized coatings on aluminum. Suitable for both smooth and rough surfaces. The MPORH-FP does measurement of thick non-ferrous metal layers and thick protective layers on steel and iron and of insulating layers on non-ferrous metals.
Isoscope - For coating thickness measurements on practically all non-ferrous metals like coatings of paint, lacquer or plastic on aluminum, copper or brass, anodized coatings on aluminum.
Technical Attributes
Model: | PERMASCOPE MP0 | PERMASCOPE MP0-FP | DUALSCOPE MP0 | DUALSCOPE MP0R | DUALSCOPE MP0R-FP | DUALSCOPE MP0RH-FP | ISOSCOPE MP0R |
ISO/Fe + NF/Fe: | • | • | • | • | • | • | - |
ISO/NF: | - | - | • | • | • | • | • |
Memory for Results: | 1,000 | 10,000 | |||||
USB Interface: | - | - | - | • | • | • | • |
Automatically Rotating Display: | - | - | - | • | • | • | • |
Measurement Range: | 0-98 mils 0 - 2,500 µm | 0-78 mils 0 - 2,000 µm | 0-80 mils 0 - 2,000 µm | 0-243 mils 0 - 7,000 (Substrate Fe) 0 - 2,500 (Substrate NF) | 0-47 mils 0 - 1,200 µm | ||
Angled Probe: | - | - | - | ||||
Weight: | 137 g | 184 g | 137 g | 184 g | 137 g | ||
Measuring Speed (over 70 measurements/min): | • | • | • | • | • | • | • |
Bluetooth: | - | - | - | - | • | - | - |
More Information
Fischer DataCenter Software
Standards
Delivery Content
MPO - Instrument With Impact Resistant Cover, Certificate Of Calibration, Certified Calibration Foil (Approx. 3Mil), Calibration Short Form, Hard Carrying Case, 2 AA Batteries, NF/Fe & Iso/NF Base Plates* and flash drive With Operator's Manual *Iso/NF Base Plates are only included with the DUALSCOPE® MPO
MPOR - Instrument With Impact Resistant Cover, Certificate Of Calibration, Certified Calibration Foils (Approx. 3Mil + 20Mil), Calibration Short Form, Operator's Manual, USB Cable, Lanyard, Hard Carrying Case, 2 AA Batteries, NF/Fe & ISO/NF Base, Plates And Support flash drive With Sub Drivers and Fischer Datacenter and PC Datex