The DATAPAQ EasyTrack 3 is the latest generation of Oven Tracker systems. Built on the pedigree of EasyTrack & EasyTrack2, the new system continues to provides the market with the easiest, robust, powerful oven profiling tool available to custom coaters, OEM operations or coating suppliers alike. It features an auto logger detect, on-board calibration data, a remote service diagnostics tool and slope markers.
The DATAPAQ ET3 Data Logger guarantees accurate temperature profiling and is designed with the easy two-button operation. Improved logger memory of x3 permits the profile detail your coating process demands (0.5 sample interval = 2.5 hours run). A battery life is improved x2.5 over the previous EasyTrack2 logger. Performing safely in up to 85°C/185°F, the plastic cool-touch case allows safe and comfortable handling even after the most demanding runs. Supplied with onboard calibration certificate, the ET3 temperature logger provides complete traceability to comply with QA standards. Send the DATAPAQ EasyTrack3 system through your oven and measure the product and oven temperature to guarantee that the correct time at temperature is achieved to give you the correct thermal coating cure.
|Application/Use:||Budget option for general paint and powder|
|Thermal Barrier:||2 hrs @ 200°C (392°F)|
|Channels:||4 or 6 thermocouple options|
|Measurement Range:||-238 to 932°F (-150 to 500°C)|
|Thermocouple Type:||K (mini-plug)|
|Logger accuracy||±0.9°F (±0.5°C)|
|Cold Junction Compensation:||Accuracy guaranteed with change in logger temperature|
|Logger Operating Range:||32 to 185°F (0 to 85°C) with safe auto shut down|
|Case:||High temperature cool touch molded polycarbonate <212°F (100°C)|
|PCB:||Coated to improve moisture protection|
|Sampling Interval:||0.5 s to 60min|
|Start Trigger:||Auto start/ start button / temperature trigger|
|Battery Use:||Replaceable 9V alkaline (ANSSI/NEDA 1604A IEC6LR61)|
|Battery Life:||Min 360 hours continuous operation - 5 s, 6 channels 77°F (25°C)|
Min 50x1 hour oven runs - 5 s, 6 channels at 158°F (70°C)
|Memory:||18.000 readings per channel per run (0.5 s sample interval = 2.5 hours run time). Non volatile hot data protection.|
|On Board Calibration Data:||Digital certificate|
|On Board Logger LEDs:||Logger & battery status indication|
|On Board Logger Diagnostics:||Service email for logger health check|
|Logger USB Power:||No battery discharge on reset & download|
|Auto Logger Detection:||Auto boot up when logger detected by Insight™ software|
|Multiple Run Capability*:||Max 3 runs separately stored in logger|
|SmartPaq*:||Intelligent logger profile run "pass/fail" indicator|
|Computer Interface Cable:||CI1150 mini-B USB connector|
|Hardwired Telemetry:||via USB cable|
|Software Compatibility:||EasyTrack Insight (V8.50); EasyTrack Insight Professional (V8.50)|
|Windows Compatibility:||32 and 64-bit versions of Windows® XP, Vista, 7, 8, 10|
|Logger Dimension (lxwxh):||170 x 67 x 20.5mm (6.7 x 2.6 x 0.8 in)|
|Logger Weight:||4 Channel - 196 g (0.43 lbs); 6 Channel - 200 g (0.44 lbs)|
|Surface Clamp:||(Maximum temperature reading of 510°F/265°C) - These probes are designed for surface contact on ferrous or non-ferrous substrates, specifically aluminum. They are constructed of stainless steel throughout with a Teflon sheathed PTFE insulated ten strand wire. The self adjusting swivel jaws ensure correct sensor alignment on substrate thickness from 0.04 to 0.9 in. (1.0mm to 24.0mm).|
|Ambient Air Clamp:||(Maximum temperature reading of 510°F/265°C) - These probes are designed specifically for measuring ambient air temperature. They are constructed with a stainless steel outer tube with a Teflon core, stainless steel clip and an exceptionally durable, quadruple wrapped, ten strand PTFE coated wire.|
|Magnetic Surface:||(Maximum temperature reading of 510°F/265°C) - Small, yet extremely strong, these new probes give accurate and repeatable temperature readings in the tightest of recesses. with a 0.7” (17mm) footprint, state-of-the-art magnets, and an easy to grasp aluminum handle.|
|Magnetic Ambient Air:||(Maximum temperature reading of 510°F/265°C) - These probes are designed specifically for measuring ambient air temperature. They are constructed with a stainless steel outer tube, and an exceptionally durable quad wrapped, 10 strand PTFE coated wire.|
|MicroMag Surface & Air:||With a 17mm (0.7”) state of the art Samarium Cobalt magnet, low thermal mass and an easy to handle aluminum knob, the MicroMag can be quickly and efficiently attached to ferrous substrates. Despite its compact size, the magnet strength guarantees secure attachment at the highest temperatures experienced within the paint and powder coating industry. The MicroMag is useful in extremely tight places.|
|Rapid Response Heavy Duty Patch:||These probes are recommended for non-ferrous substrates such as plastic or aluminum. The welded thermocouple junction allows for a rapid response time of 1 sec. They are attached to the test piece by spot-welding, soldering or use of high temperature tape. These probes can also be used in still air environments as a rapid response ambient air probe.|
|* Requires Insight Professional software|
Applications - Custom coaters "job shops", Coating suppliers, Oven manufacturers, General industrial, Automotive component supply, Architectural coating, Textile coating, Wood coating, Consumer goods, Domestic appliance, Metal packaging, High temperature coating, and Specialty coatings
EasyTrack Insight Software - The EasyTrack3 temperature profiling system comes with two choices of software; standard EasyTrack Insight or the new EasyTrack Insight Professional version.
Both software versions allow to confirm that cure temperatures meet paint manufacturers’ specifications, make comparisons probe-to-probe, identify that the Datapaq® values fall within an acceptable tolerance range and evaluate process parameter changes. With a simple click of the mouse, you can print out a profile report that will satisfy all necessary regulatory requirements.
In addition, the Professional software package unlocks some new key features of the ET3 datalogger, such as multiple run and SmartPaq operation. It also provides an enhanced analysis and reporting platform allowing a professional coating suppliers to offer efficient service to their customers.
Thermocouples/Probes - The EasyTrack3 system is offered with a comprehensive range of thermocouples to suit every application and product type - from universal exposed junction probe which can be taped directly to any product or material type to a compact designed Micromag probe attaching quickly directly to your steel product.
Thermocouple range offers accuracy and reliability. Quad wrapped, 10 Stand PTFE and metal braid coated type K thermocouples designed with circular cross section to reduce kinking and strong crimped plug cable attachment. Specified to ANSI MC96.1 special limits of error ±0.4 % or 1.1 °C (2.0 °F). PTFE cables are rated up to 265 °C (509 °F). Cables quoted 1.5 m (6 ft) but available in variety of lengths.
The probe is further improved by a stronger 'crimped' plug/cable attachment and a circular cable cross section to reduce kinking and twisting. The green color of the cable conforms to the IEC584 color standard for Type K thermocouples.
13463 - 4 Channel System, Patch Probes - 4 channel Data Logger, Thermal Barrier with Heat sink, EasyTrack InsightSoftware, 2 9V Batteries, Manual, Quick Reference Guide, 4 Heavy Duty Patch Probes with 5' Cable
13464 - 6 Channel System, Patch Probes - 6 channel Data Logger, Thermal Barrier with Heat sink, EasyTrack InsightSoftware, 2 9V Batteries, Manual, Quick Reference Guide, 6 Heavy Duty Patch Probes with 5' Cable
14448 - 4 Channel System, Clamp Probes - 4 channel Data Logger, Thermal Barrier with Heat sink, EasyTrack InsightSoftware, 2 9V Batteries, Manual, Quick Reference Guide, 4 Clamp Probes with 5' Cable
14449 - 6 Channel System, Clamp Probes - 6 channel Data Logger, Thermal Barrier with Heat sink, EasyTrack InsightSoftware, 2 9V Batteries, Manual, Quick Reference Guide, 6 Clamp Probes with 5' Cable
15321 - 4 Channel System, Magnetic Probes - 4 channel Data Logger, Thermal Barrier with Heat sink, EasyTrack InsightSoftware, 2 9V Batteries, Manual, Quick Reference Guide, 4 Magnetic Probes with 5' Cable
13463 - 6 Channel System, Magnetic Probes - 6 channel Data Logger, Thermal Barrier with Heat sink, EasyTrack InsightSoftware, 2 9V Batteries, Manual, Quick Reference Guide, 6 Magnetic Probes with 5' Cable