Cylindrical Mandrel Bend Test
Article No. 12084
SP1822 Cylindrical Bend Test, Imperial
- Cylindrical Bend Test SP1822
- Imperial Measurement Scale
Features
- The TQC Cylindrical Bend Test is used to determine the elasticity adhesion and elongation of paint on sheet metal in accordance with ISO 1519.
- A test panel (max. size 150 x 100 mm) is bent over a cylindrical mandrel, the smaller the diameter of the mandrel, the larger the tension on the coating. The test panel is then checked for cracks or damage in the coating.
- Sturdy apparatus made of a combination of anodized aluminium and stainless steel.
- Ergonomic clamping device for test panels and large knob on bending arm easy and smooth bending.
- Large test panel size: max. 150 x 100 mm
- Luxurious wall mounted / desktop mandrel holder
- The Cylindrical Bend Test is designed to perform tests according to the latest ISO standards. ISO 1519: "Assessing the resistance of a coating, paint, varnish or related products to cracking and/or detachment from a surface when, subjected to bending around a cylindrical mandrel under standard conditions".
- Though robust in design, this instrument is precision-machined. Always clean the instrument after use with a soft dry cloth. Do not use compressed air to clean the instrument.
Technical Attributes
-
- Data
-
Cylindrical Bend Test Dimensions: 140x 170 x 340 mm Weight: 4150 gram Max. Test Panel Size: 150 x 100 mm Max. Test Panel Thickness: 1 mm Desk Holder with 14 Mandrels Dimensions: 100 x 130 x 160 mm Weight: 2900 gram
Standards
SP1820 Complies to ISO 1519. Look up the appropriate standard for a correct execution of the test. Also refer to ISO 1512-ISO 1514-ISO 2808-ISO 3270. SP1822 Complies to ASTM D522
Procedure
- Apply the paint film on a test panel (maximum panel thickness 1 mm and maximum size panel 100 x 150 mm). Coat and dry film carefully.
- Install the apparatus on the table with the clenching wheel on the left side.
- Sufficiently open the apparatus to insert the mandrel with the correct diameter turning the handle of the pressure rollers anti clockwise.
- Place and secure a test-panel in the apparatus, positioned against the mandrel.
- Fix it upright into the clamp.
- Pull the handle, and with a smooth movement, taking 1 - 2 seconds, make an even 180° bend.
- Release the test-panel from the test-apparatus and examine results immediately
Delivery Content
Cylindrical Bend Test 100 mm, Desk holder with set of 7 mandrels with a diameter of 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1"
Accessories
Other Variations