+1 (954) 946-9454

Cylindrical Mandrel Bend Test

Article No. 12084

SP1822 Cylindrical Bend Test, Imperial

  • Cylindrical Bend Test SP1822
  • Imperial Measurement Scale

Select your model

$2,249.00 excl. taxes & shipping cost

Features

  • The TQC Cylindrical Bend Test is used to determine the elasticity adhesion and elongation of paint on sheet metal in accordance with ISO 1519.
  • A test panel (max. size 150 x 100 mm) is bent over a cylindrical mandrel, the smaller the diameter of the mandrel, the larger the tension on the coating. The test panel is then checked for cracks or damage in the coating.
  • Sturdy apparatus made of a combination of anodized aluminium and stainless steel.
  • Ergonomic clamping device for test panels and large knob on bending arm easy and smooth bending.
  • Large test panel size: max. 150 x 100 mm
  • Luxurious wall mounted / desktop mandrel holder
  • The Cylindrical Bend Test is designed to perform tests according to the latest ISO standards. ISO 1519: "Assessing the resistance of a coating, paint, varnish or related products to cracking and/or detachment from a surface when, subjected to bending around a cylindrical mandrel under standard conditions".
  • Though robust in design, this instrument is precision-machined. Always clean the instrument after use with a soft dry cloth. Do not use compressed air to clean the instrument.

Technical Attributes

  • Data
    Cylindrical Bend Test
    Dimensions:140x 170 x 340 mm
    Weight:4150 gram
    Max. Test Panel Size:150 x 100 mm
    Max. Test Panel Thickness:1 mm
    Desk Holder with 14 Mandrels
    Dimensions:100 x 130 x 160 mm
    Weight:2900 gram

Standards

SP1820 Complies to ISO 1519. Look up the appropriate standard for a correct execution of the test. Also refer to ISO 1512-ISO 1514-ISO 2808-ISO 3270. SP1822 Complies to ASTM D522

Procedure

  1. Apply the paint film on a test panel (maximum panel thickness 1 mm and maximum size panel 100 x 150 mm). Coat and dry film carefully.
  2. Install the apparatus on the table with the clenching wheel on the left side.
  3. Sufficiently open the apparatus to insert the mandrel with the correct diameter turning the handle of the pressure rollers anti clockwise.
  4. Place and secure a test-panel in the apparatus, positioned against the mandrel.
  5. Fix it upright into the clamp.
  6. Pull the handle, and with a smooth movement, taking 1 - 2 seconds, make an even 180° bend.
  7. Release the test-panel from the test-apparatus and examine results immediately

Delivery Content

 Cylindrical Bend Test 100 mm, Desk holder with set of 7 mandrels with a diameter of 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1"

Join our Email List. subscribe
CANCEL