M/1 Stick Low Voltage Wet Sponge Holiday Detector
Article No. 15182
M/1 Low Volt Holiday Detector Stick Type
The M/1S Holiday Detector has an ergonomic design with a twist lock ground cable. It also has a strong fiberglass wand, a large sponge and a plastic sponge holder. Incredibly strong and light weight wand material reduces fatigue and won’t bend. The sponge holder is plastic and will not damage coatings.
Features
Regulated 67.5v DC Output
Wet Sponge - type holiday detector
Push button calibration check
2 Resistance settings
80k O for tanks and pipe
90k O for coatings on concrete
Use on thin film coatings
Non-destructive
Battery operated (9v) with easy battery access
All in One "Stick" type
Impact resistant plastic case
Stainless steel hardware
Very tough fiberglass wand handle
Long life ground cable
Use on thin film coatings on conductive substrates such as tanks, concrete, etc.
Technical Attributes
-
- Data
-
Output: 67.5v D.C. Resistance for Coating on Metal: 80k Ω* Resistance for Coatings on Concrete: 90k Ω Instrument: 12.25” x 3.5” x 1.75”, 2 lbs (311mm x 89mm x 45mm, 1kg) Shipping: 20” x 5..5” x 4”, 3 lbs. (508mm x 139.7mm x 101.6mm, 1.35kg) *Factory setting is 80k Ω. See Instructions for information on changing setting to 90k Ω
Standards
Conforms to standards for low voltage holiday detection: NACE International RP0188 ASTM D5162-A
Delivery Content
Instrument with battery, Sponge Electrode 6" x 3.5" x 2" (ships compressed), 15 ft Locking Ground cable, 18" Wand handle, Screwdriver, Water Wetter solution 4oz, Carryall canvas bag, Instructions
Downloads