408/409 Shore A and D Durometers
Article No. 11713
Shore A Durometer
- Shore A Durometer
- Measures rubber, elastomers, neoprene, silicone, vinyl, printing rollers, etc.
Features
- The unique ergonomic styling of this durometer makes it the first choice for making handheld hardness measurements.
- A removable knob allows the instrument to fit comfortably in your palm.
- An 8-32 threaded hole also enables the unit to fit in most durometer stands.
- The dial scale can easily be read to 1/2 point readings.
- A standard Max-hold hand remains at the peak reading until reset
- Ergonomic styling for handheld use
- Calibration test report included
- Accuracy of ±1 point
- Max reading pointer standard
- Easy to read 0 to 100 point dial
- NIST traceable certification available
- The included test block is made from aircraft grade aluminum and has a steel leaf spring to give a hardness reading within ±1of its value.This test block gives much more reliable readings than rubber blocks and its readings are unaffected by normal ambient temperature and humidity.
Technical Attributes
-
- Data
-
Range (Shore Type A & D): 0 to 100 points Accuracy: ± 1 point Weight: 6 oz. (170 g) Shipping Weight: 3 lb. (1.4kg) Height: 4 in. (10.2 cm) Width: 2-1/4 in. (5.7 cm) Depth: 1-3/4 in. (4.4 cm) Base: 1 in x 1 in (2.54 cm x 2.54 cm)
Standards
Meets or Exceed Current ASTM D2240 Specifications for Type A & D
Procedure
- Choose the appropriate Shore hardness scale to measure the hardness of your test sample.
- Place your test sample on a flat, horizontal, and hard surface that is at least ¼-inch thick.
- Hold your durometer with both hands and place it on your test sample.
Delivery Content
Complete with test block, carrying case and a Report of Test.
Downloads