+1 (954) 946-9454

Pensky-Martens Open Cup Flash Point Tester

Article No. 11470

Pensky-Martens Cleveland FlashPoint Test

The Pensky-Martens Open Cup Flash Tester is used for flash and fire points of all petroleum products, except fuel oils and those having an open cup flash below 79°C (175°F). It determines flash and fire points by the Cleveland Open-Cup method. Conforms to ASTM D92, CE Marked


$429.00 excl. taxes & shipping cost


  • Applicator is precisely aligned per specifications and pivots for test flame application at specified temperature intervals.

  • Hinged thermometer support raises to facilitate placement and removal of test cup.

  • Adjust flame size using built-in needle valve and comparison bead.

  • Equipped with a 1000W nickel-chromium heater with stepless variable heat control for accurate repeat setting of temperature rate of rise per specifications.

  • All models require a gas regulator and an external source of flame ie: propane/butane bottle or bbq tank (not supplied), as per the ASTM methods.

Technical Attributes

  • Data
    Length x Width x Height, in.(cm):10 x 17.5 x 11.5 (25.4 x 44.5 x 29.2)
    Net Weight:20 lbs (9.1kg)
    Conforms to the Specifications:ASTM D92; D6074, D6158; AASHTO T48; ANS Z- 11.6; IP 36; ISO 2592; DIN 51376; FTM 791-1103, FTM 141-4294
    Electrical Requirements:115V 60Hz
    220-240V 50/60Hz, Single Phase, 3.4A
    Shipping Information:Shipping Weight: 30 lbs (13.6 kg)
    Shipping Dimensions: 2 Cu. ft.


Conforms to ASTM D92, CE Marked

Delivery Content

Consists of test flame applicator, brass test cup, thermometer support, heating plate and electric heater.

Join our Email List. subscribe