+1 (954) 946-9454

TQC Drying Time Recorder

Article No. 11306

TQC Drying Time Recorder with 6 Needles

The TQC Drying Time Recorder is a fully digitally controlled machine that conforms to the BK (Beck Koller) method and meets ASTM D5895, ISO 9117-4 and DIN EN 14022.

$2,395.00 excl. taxes & shipping cost

Features

  • Clear digital display and intuitive controller makes defining the final result or checking intermediate stages very easy.
  • The compact machine has six tracks, and comes with two robust and reusable glass beds of 100x350x3 mm.
  • Optional are six narrow glass beds in special adapters.
  • The front panel of the TQC Drying Time Recorder is made out of hardened glass, which is easy to clean and protects the display underneath it.
  • The TQC Drying Time Recorder is powered by a safe 24 V DC power supply.
  • The drive system is lubricant free, so there is no risk of lubricants that thicken at lower temperatures.
  • The display is heated which enhances menu visibility at lower temperatures. These design features result in a wide operating temperature range from -20°C to +70°C (non-condensing), which makes it possible to perform tests in climate chambers.
  • Broad and flexible time range can be set varying from 1 minute up to 200 hours. This makes the TQC Drying Time Recorder suitable for fast drying waterborne coatings as well as very slow drying paints that may need days to dry.
  • Flexible travel times, digitally adjustable from 1 minute to 200 hours
  • Digitally controlled, fully flexible
  • Check intermediate and final results on the machine's display
  • Heated display enhances menu visibility at lower temperatures
  • Lubricant free drive system
  • Triple I operating interface (Intelligent - Illumination - Indicator); just those keys that are active are illuminated
  • Very accurate: < 1% of set time
  • Glass front panel eases cleaning and protects the display
  • Reusable glass beds
  • Safe 24 V DC power supply

Technical Attributes

  • Data
    Operating Temperature:-20°C to +70°C / -4°F to 158°F (non-condensing)
    Drying Time Range:1 minute to 200 hours
    Time Accuracy:< 1% of set time
    Maximum Track Length:300 mm
    Maximum Number of Tracks:6
    Force Per Needle:3.5 g / 0.03 N
    Weight of Additional Weights:5 g
    Diameter of Needle:2 mm
    Radius of Needle:1 mm
    Test Beds:2 x triple track 350 mm X 100 mm X 3 mm glass bed (supplied), or 6 x solo track 305 mm X 25 mm X 3 mm glass bed, or Custom bed; max dimensions W 200mm x L 400mm* x H 8mm

    - *Test surface is always 300 mm in length
    - 400 mm length max. without extra support. Longer panels need an extra 125mm high support.
    Material:Stainless steel, powdercoated steel, anodised aluminium, nylon, glass
    D x W X H:335 mm x 400 mm x 190 mm
    Net. Weight:9.5 kg
    Power Supply:Universal 24 V DC power adapter
    Power Consumption:Max. 40 Watt
    Display:128 x 64 pixels graphical LCD, 70 mm x 40 mm, white illuminated
    Menu Language:English
    User Input Method:Illuminated tactile navigation button with Triple I function

More Information

Care and Maintenance

  • Though robust in design, this instrument is sensitive. Never drop it or knock it over.
  • For the most accurate and reproducible results, do not operate the machine in direct sunlight or strong overhead lighting.
  • Avoid using the machine outside specified conditions.
  • Please take note that relative humidity will influence the results obtained by the machine.
  • Do not store the machine in high relative humidity environments to prevent corrosion.
  • Always make sure the instrument is connected to a grounded mains outlet.
  • Maintenance and inspection should be carried out at the correct intervals.
  • Operating personnel should be informed before starting with maintenance or repair work .
  • Always make sure the instruments power is turned off and the instrument is not connected to a socket while adjusting any electrical component whenever maintenance, inspection or repair work is done.
  • Do not open the instrument. In case of malfunction always consult the manufacturer.
  • Never touch electronics or circuit boards when not ESD secured.
  • The drying time recorder is subject to some natural wear and must be inspected from time to time to ensure that it is in fault-free condition.
  • When in use it is not always possible to avoid some spill of paint on the work surface. Try to keep the instrument as clean as possible to prevent distortions of functions. Always clean the instrument thoroughly after use.
  • To clean the instrument properly use a suitable solvent to dispose remains of paint or ink.
  • Never use aggressive solvents such as MEK or Acetone as this might damage the coating of the machine.
  • Never clean the instrument by any mechanical means such as a wire brush or abrasive paper. This may cause, just like the use of aggressive cleaning agents, permanent damage.
  • Wear gloves during cleaning; Don’t spill an overdose of solvent during cleaning.
  • Cleaning materials must always be used and disposed of correctly.

Standards

Meets ASTM D5895, ISO 9117-4 and DIN EN 14022

Delivery Content

Drying Time Recorder complete with six needles, six weights (5g each), two glass beds, power cord and adapter 24VDC

Accessories

11307
Spare 5 Gram Weights For TQC Dtr, 12/pk
$148.00
11308
Spare Needles For TQC DTR 12/pk
$126.00
11309
Glass Beds For TQC Drying Time Recorder
$245.00
11310
Narrow Glass Beds For TQC Dtr
$136.00
11311
Narrow Glass Panels Adapter
$57.00
11312
3 Reservoir Film Applcator 90uM & 150uM
$642.00
11316
TQC Cube Applicator, 38/76 micron gaps
$269.00
11317
TQC Cube Applicator, 50/100 micron gaps
$269.00
11318
TQC Cube Applicator, 75/150 micron gaps
$282.00
11320
TQC Cube Applicator, 1.5/3.0 mil gaps
$269.00
11321
TQC Cube Applicator, 2/4 mil gaps
$269.00
11322
TQC Cube Applicator, custom mil gaps
$269.00
Join our Email List. subscribe
CANCEL