Scott Volumeter
Article No. 14126
Scott Pharma Wash Volumeter 10 mesh
Stainless Steel base
Features
- The Paint-Pigment Volumeter is used to determine apparent density of dry pigments or other free flowing, fine powders. It provides a means of reproducibly packing a tared cubic inch measure and then weighing the filled container. The upper funnel contains a 40 mesh wire screen support. Uses 1" brass cube measure (which is not certified, however, care has been taken to maintain the highest degree of manufacturing consistency as possible) and counter poise.
- The Pharmaceutical Volumeter is used to determine apparent density of microcrystalline cellulose. Referred to in National Formulary 18. The upper funnel contains a 10 mesh wire support. Uses a 25cc brass density cup. The Stainless Steel version of the Pharmaceutical Volumeter includes a 10 mesh funnel and a certified 25cc brass density cup. It is used to determine the apparent density of microcrystalline cellulose or other pharmaceutical products and caustic free-flowing powders. The use of stainless steel for the funnels, base and baffle box, and glass plates for the baffles makes this unit the easiest to clean and maintain
- The Metal Powder Volumeter is used to determine apparent density of refractory metal powders and compounds. Referred to in ASTM B 329-06. The upper funnel contains a 16 mesh wire screen. Uses a 25cc brass density cup.
Standards
ASTM B329-06 ASTM B873
Procedure
Paint Pigment Model Instructions
- Weigh the empty, dry cubic inch measure on a balance sensitive to 0.1 gram.
- Place the tared measure below the opening at the bottom of the baffle column
- Pour somewhat more than a cubic inch of the powder sample, dry and free from lumps, on the upper funnel and gently rub it through the screen with a non-metallic spatula. When the measure is full to overflowing, level it with a spatula to ensure that it is exactly full, being careful not to compress or shake down the material in the measure.
- Weigh the measure and its contents.
- Subtract the weight of the empty measure. The difference is the "apparent density" in terms of weight per cubic inch.
- After each determination, the funnels and measure should be removed and cleaned with a soft brush and the baffle box should be tapped to free it of any adhering pigment.
Delivery Content
14114 - Volumeter, 40 mesh funnel, and 1" measure counter poise
14116 - Volumeter, 10 mesh funnel, and 25cc brass denisty cup
14117 - Volumeter, 16 mesh funnel, and 25cc brass density cup
14118 - Volumeter, 18 mesh funnel, and 25cc brass density cup
14126 - Volumeter, 10 mesh funnel, and 25cc brass density cup
Accessories
14119
25cc Replacement Brass Density Cup
$351.00
14120
1" Replacement Measure & Counterpoise
$214.00
14121
Replacement SS Funnel 10 mesh
$114.00
14122
Replacement SS Funnel 16 mesh
$114.00
14123
Replacement SS Funnel 40 mesh
$114.00
14124
Replacement SS Funnel 18 mesh
$114.00
14125
Replacement SS Funnel 70 mesh
$164.00
14112
Glass Replacement for Baffle Assembly
$49.95