Name: PATTI Quantum Digital with F-2 Piston
Price: 3495.0 USD
Availability: InStock

Features

Four models available, Analog, Digital, Gold and Concrete (includes accessories for concrete coatings testing)
Quantitatively measures the adhesion strength of numerous coatings, including paints, polymers, ceramics, inks, films, adhesives, and thermal or arc-sprayed metals
Great for laboratory or field use
Simplified design requires fewer internal parts and reduces the frequency of maintenance/repair
The reduced number of internal parts makes the it lighter and more portable than other PATTI®'s
The test surface can be smooth, rough, porous, flat or curved
Can also be used to test the strength of adhesives under non-room environmental conditions from 32-212 degrees Fahrenheit (0-100 degrees Celsius)
All pistons are self-aligning
Patented piston design assures uniaxialalignment with the pull-stub axis for "true tensile testing"
New regulator eliminates the internal pop valve, allowing for use of entire air cartridge
New air cartridge capacity is twice that of other models
The powder-coated box is robust and will maintain its aesthetic value
With the exception of the new, higher capacity CO2 Cartridge, you can use the same pistons, pull-stubs, and supplies as previous PATTI®'s
There is a different piston for each load range, it is recommended that you choose the piston whose midpoint testing range is closest to the suspected tensile strength of your coating. For instance, suppose that your coating has a tensile strength near 1000 psi. You would choose the F-2 piston option. Although the F-8 piston could test a coating in this range, it would be on the lower end of the range of the F-8. At least 100 psig supply pressure (up to 150 psig) is required
Certified calibration and accessories for testing adhesives are available
Custom-machined pull-stubs are available at any size, either flat or with a radius to match curved surfaces
The Digital and Gold Models display maximum load on a 4-1/2 digit seven-segment display gauge with 0.5% accuracy. They also display the increasing load, and hold the maximum psig value when the Min/Max button is pushed. Simply push Zero/Clear in order to zero the readout and you are ready for the next test.
The PATTI Quantum GOLD Model also features:
- Real-time transmission of pull-tests via USB and the included netbook
- A LabVIEW®-created software package developed specifically for the Gold Model - eliminates the need for charts. Pre-installed on the included netbook
- Computer generated reporting capabilities in HTML - suitable for immediate posting on your server to share pull-test results around the world instantly
- USB camera attachment and associated software to photo document your pulls

Technical Attributes

Data

Models:	PATTI Quantum Analog/Concrete	PATTI Quantum Digital	PATTI Quantum Gold
Gas Supply:	Self-contained or external supply, 100psig
Power Supply:	N/A	(2) AAA Alkaline batteries (included)
Weight:	< 4 Pounds
Material:	Powder-Coated Enclosure
Dimensions (Control Module):	8" x 3-1/8" x 6" (20.3 x 7.9 x 15.3 cm)
Load Range:	1-10,000 psi using 1/2" pull-stubs
Display:	Analog	4.5 digit seven-segment display gauge with 0.5% accuracy
Operating Temp. Range:	50 - 120°F
Compatible Pistons:	F-1, F-2, F-4, F-8, F-20 (F-8/12)
Adhesion Strength Test Range with F-8 Piston:	50-4,000 psi
With Optional F-20 Piston:	400-10,000 psi
Tensile Strength Conversion:	Chart		Automatic using included laptop
Computer Connectivity:	-	-	Netbook with LabView Software
Sharing Capabilities:	-	-	Sharing via USB
Reporting:	-	-	Computer Generated Reports
Documenting Capabilities:	-	-	USB Camera
Standards:	ASTM D-4541, and ACI 503-30 Appendix A, A.1.		ASTM D-4541, ACI 503-30 Appendix A, A.1, ISO 4624, ASTM D7234 and ISO 16276-1

Piston:	F-1	F-2	F-4	F-8	F-8/12 (F-20) (3 Load Ranges)
Load Range (PSI using 1/2" dia. pull-stubs):	50-500	100-1000	200-2000	400-4000	F-8; 400-4000 F-12; 600-6000 F-20; 1000-10,000
Piston Diameter:	1-3/4" (1.75")	2-1/4" (2.25")	2-7/8" (2.875")	3-3/4" (3.75")	5 3/4" (5.75")

Standards

ASTM D-4541, ACI 503-30 Appendix A, A.1, ISO 4624, ASTM D7234 and ISO 16276-1

Procedure

The PATTI® Quantum uses compressed inert gas to apply a continuous tensile load to an aluminum pull-stub which is bonded to the test surface with an adhesive.
After the adhesive has cured, the operator attaches the selected piston.
Then the operator pushes and holds the "RUN" button. A continuous load is then applied perpendicular to the pull-stub until failure occurs, or until a specified load is reached.
The PATTI® can be pressurized with CO2 cartridges to make it portable for field use. In the laboratory, nitrogen or any clean inert gas system providing at least 100 psig (up to 160 psig) can be used.

Delivery Content

PATTI Quantum Analog includes Analog Laboratory/Field control module, one single load range piston (state range desired), transport toolbox, accessory kit [50 1/2 pull-stubs, 50 adhesive masks, high and low-pressure hoses, epoxy kit, talcum powder, *6 CO2 cartridges] and instruction manual.

PATTI Quantum Digital includes Digital Laboratory/Field control module, one single load range piston (state range desired), transport toolbox, accessory kit [40 San*O*dized pull-stubs, 40 adhesive masks, high and low-pressure hoses, epoxy kit, talcum powder, *6 CO2 cartridges] and instruction manual.

PATTI Quantum Gold includes Digital Laboratory/Field control module, one single load range piston (state range desired), netbook computer with pre-installed LabVIEW-generated software analysis package, USB camera with custom stand for photo-documentation, transport toolbox, accessory kit [50 1/2" pull-stubs, 50 adhesive masks, high and low pressure hoses, epoxy kit, talcum powder, *6 CO2 cartridges] and instruction manual.

PATTI Concrete includes Analog Laboratory/Field control module, one dual load range piston (F8/12 aka F-20), transport toolbox, accessory kit [(20) 2" Pull-Stubs, Stand-Off Ring, high and low-pressure hoses, epoxy kit, talcum powder, *6 CO2 cartridges] and instruction manual.

*Due to FAA regulations CO2 cartridges will only be shipped by ground. Cartridges can generally be purchased at bike shops or sporting goods stores.

Accessories

12714

Piston F-1 50-500 Psi Range 1.75" Dia

$432.00

12715

Piston F-2 100-1000 Psi Range 2.25" Dia

$432.00

12716

Piston F-4 200-2000 Psi Range 2.875" Dia

$432.00

12717