+1 (954) 946-9454

Cross Hatch Paint Adhesion Test Kit

Article No. 12596

Cross Hatch Kit, PAT 2000 ASTM D3359

The Cross Hatch Paint Adhesion Test Kit (P.A.T.) produced by Gardco is a visual adhesion test used for evaluating adhesion by cutting the paint or coating into small squares, thereby reducing lateral bonding. BLADES SOLD SEPARATELY, find them in the Accessories section below.

Select your model

$209.00 excl. taxes & shipping cost

Features

  • The Paint Adhesion Test Kit, (P.A.T.), contains all of the tools and materials needed, except for the multi-tooth cutter blade, for conducting adhesion tests on paints applied to a flat, uniform surface in accordance with ASTM Test Method D3359, method B and DIN Standard No. 53151.
  • There are two kits available:
    • The 12596 is great for any type of flat surface cross hatch adhesion test
    • The 14407 is ideal for curved surfaces, such as pipes. It is specfically desgined for cross hatch tests on surface with a radius, it comes with two handles which allows the user to make a trans radius cut with the curved blade and a longitudinal cut with the straight blade without having to change blades.
  • The ergonomic handle design gives comfortable and precision control in cross hatch testing
  • It helps keep your hand in a natural position, preventing strain and fatigue
  • Great for both right and left handed people
  • ALL blades are sold separately to permit choice among the various available designs. Find them in the Accessories section below, options include:
    • Blade cutters with guide and six spaced teeth at 1.0 and 2.0 mm
    • Blade cutters without guide teeth with eleven spaced teeth at 1.5 mm
    • Blade cutters with guide and eleven spaced teeth at 1.0 mm
    • Blade cutters for pipe radius
    • Variable spaced blade cutters, due to the accuracy of the spacings and the speed with which the test can be conducted, it is the preferred tool for use in this test except when evaluations must be made on coatings applied to surfaces which are neither flat or relatively smooth. Under these adverse conditions a single razor blade type cutter is often desirable under method A of ASTM.

Technical Attributes

  • Data
    Cutter Blades
    Tooth Spacing / mmCross Hatch Segment Area Square / mm
    1.001.00
    1.502.25
    2.004.00
    3.009.00

     

    Variable Spaced Blade (12599)
    The following table shows the segment area in square mm for each of the segments in the variable spaced multi-tooth crosshatch pattern. The variable spaced multiple tooth cutter has 14 teeth providing 13 spaces between the teeth ranging from 0.46 mm to 2.58 mm. This spacing provides segment areas ranging from 0.21 square mm to 6.66 square mm.
    Tooth Spacing in mm0.460.530.610.710.820.941.091.261.451.681.942.242.58
    Segment Area in
    Sq. mm
    1.191.371.571.832.122.432.813.253.744.345.015.786.66
    1.031.181.361.591.832.102.442.823.243.754.345.015.77
    0.891.031.181.371.591.822.112.442.813.253.754.334.99
    0.770.891.021.191.371.581.832.112.432.823.253.754.32
    0.670.770.891.031.191.361.581.832.112.442.823.253.75
    0.580.670.770.891.031.181.371.581.822.112.442.823.24
    0.500.580.660.770.891.021.191.371.581.832.112.442.81
    0.430.500.580.670.770.891.031.191.371.581.832.112.43
    0.380.430.500.580.670.770.891.031.181.371.581.832.11
    0.330.370.430.500.580.660.770.891.031.191.371.581.82
    0.290.330.380.440.510.580.680.780.901.041.201.391.60
    0.230.270.310.360.410.470.550.630.730.850.981.131.30
    0.210.240.280.330.380.430.500.580.670.770.891.031.18

More Information

Cross Hatch Blades - The multiple tip cutters for the Paint Adhesion Test Kit are specially designed to provide optimum results. Not only are they produced to very close tolerances, but also as a final step in production they are given a black oxide coating (bluing) to prevent rusting. Handle mounting holes do not go all the way through the cutter. This prevents the cutter from being improperly secured in the handle. The holes must face the securing set screws. A further very important improvement to the multiple tip cutter is not immediately apparent. Even with the best possible production tools and procedures, it is very difficult to hold the tolerance on individual tooth length closer than ±0.0005 inches. Even this very small variation is just not good enough for best results from the test. An additional last step in the production process provides essentially zero tolerance on blade length. The cutters are first produced to insure a normal cut. This is then followed by a fine lateral honing which slightly modifies the teeth. There are Several Advantages:

  • The teeth are stronger and less subject to damage
  • There is a cleaner edge cut where the coating interfaces with the supporting base
  • Cutter life is increased

The tolerance on tip length is greatly improved permitting lower pressure to be used on the cutter and avoiding gouging of the supporting base with a long tip

As general guide for coatings having a dry film thickness up to and including 2.0 mils (50 µm) space the cuts 1 mm apart and make eleven cuts (12603) unless otherwise agreed upon. For coatings having a dry film thickness between 2.0 mils (50 µm) and 5 mils (125 µm), space the cuts 2 mm apart and make six cuts (12610) unless otherwise agreed upon. For coatings having a thickness greater than 5 mils (125 µm) space the cuts 5.0 mm apart and make 5 cuts (12633) unless otherwise agreed upon.

Radius Blade - The uniform 1 mm six tooth cutter is now available for use on such surfaces where the radius of curvature is no less than 0.75 inches. This special cutter for materials applied to simple curved surfaces is produced from a modified standard multi-tooth cutter. The rake angle (the angle of the tooth tip to the back of the cutter) is accurately known. Therefore, by removing a portion of the front surface of the cutter, the tooth is shortened by a known amount. Since the shortening of the tooth is proportional to the thickness of cutter removed, the cutter may be produced to work on any given radius of curvature above a practical limit of 0.75 inches. The cutter for radius surfaces is mounted in the same size and style of handle as all other GARDCO multi-tooth adhesion cutters. The handle, however, is special in that the center portion of the nylon protector is notched to assist in correctly orienting the cutter on the curved surface. Radius Blades available for the 14407 Kit - call for more information.

Note:  For 2.0mm blade, the two outer "outrigger" teeth are for stability only
12633 is for conducting adhesion tests on coatings having a thickness greater than 5 mils (0.005") (125 microns).
12607 Carbide Tip (1.5 mm spacing) 11 Teeth - 5 piece minimum availble upon request - call for pricing.

 

Standards

Meets ASTM Test Method D3359, F1842; ISO 2409; Method B; DIN Standard No. 53151

Procedure

  1. Prepare test specimen as outlined in ASTM D3359.
  2. Position the blade in the handle with the holes facing the securing set screws, take care not to over tighten.
  3. Place the cutter assembly on the test specimen so that the guide and cutter rests on the substrate.
  4. Grasp handle and rotate it upward with respect to the line of contact of the guide with the test surface. During this motion, the tips of the cutter first contact the test surface when the top of the handle is about seven degrees with respect to the test surface. Continue this motion until the top surface of the handle is elevated to about 15 degrees. This is the correct attitude of the cutter assembly for the test.
  5. Apply enough pressure on the handle to insure that all of the cutter tips penetrate the test specimen supporting base, pull assembly along the test surface through 0.75 to 1 inch. Repeat this procedure with a second cut intersecting the first pattern at 90° (±5°). Evaluate results of the test as indicated in ASTM D3359, method B.

Note: Before shipment, our blades must pass a cutter blade tooth accuracy inspection check. You can periodically check the accuracy of your cutter blade in the same manner. Use a small piece of polished plate glass. With a match or lighter, smoke a portion of the glass. This will leave an extremely black thin film. With the blade mounted in the handle, pull it across the film. All teeth should make tracks. If all teeth do not touch when used on a coated panel it will indicate that the panel surface is not plane or one or more of the teeth have been damaged.

Some customers using the cross-cut (or cross-hatch) adhesion blades have had problem getting all the teeth to cut evenly through their coating. From our experience, we have found that uneven cutting is usually due to warped panels. When using the crosscut blades, it is important that the panel being scratched be supported by a flat, rigid table or surface. Additionally, sufficient force must be used for the blades to cut completely through the coating. Often this is a catch-22 situation. If your panel is not supported sufficiently, then more applied pressure simply bends the panel.

Delivery Content

12596 Paint Adhesion Test Kit includes the blade holder / handle with guide, hex wrench for changing blades, flaking brush, 5x LED hand held magnifier w/batteries (magnifier has 2 LED lights and 1.5" glass lens), Polyester Rope Fiber Laminate tape, instruction guide, and a sturdy plastic carrying case with handle. All of the components are nested in diecut foam within the case. Blades sold separately. ASTM D3359 Reprint is not included, can be purchase separately (12649)

14407 Paint Adhesion Test Kit for curved surfaces includes (2) 12614 blade holders / handles with nylon protector and guide, hex wrench for changing blades, flaking brush, 5x LED hand held magnifier w/batteries (magnifier has 2 LED lights and 1.5" glass lens), Polyester Rope Fiber Laminate tape (12648), instruction guide, and a sturdy plastic carrying case with handle. All of the components are nested in diecut foam within the case. Blades sold separately, choose curved blade for trans radius cut, or call us for a custom size above .75", and add the (12600) straight blade for the longitudinal cut (also required).

Accessories

12651
Nichiban LP-24 Tape
$38.00
12600
Fine Blade, 1mm Spacing, 6 Teeth
$97.00
12603
Fine Blade, 1mm Spacing, 11 Teeth
$97.00
12605
Medium Blade, 1.5mm Spacing, 11 Teeth
$97.00
12608
Coarse Blade, 2mm Spacing, 11 Teeth
$172.00
12610
Coarse Blade, 2mm Spacing, 6 Teeth
$97.00
12632
Coarse Blade, 2.4mm Spacing, 4 teeth
$97.00
12612
Very Coarse Blade, 3mm Spacing, 6 Teeth
$97.00
12633
Thick Coatings Blade 5mm Spacing 5 Teeth
$145.00
12634
API RP 5L2 Blade, 1.6mm Spacing 16 Teeth
$260.00
12599
Variable Spaced Cutter 14 Teeth
$117.00
12597
Cross Hatch Blade Certification
$263.00
12616
Allen Wrench For PAT Kit
$3.00
12645
ILLUMINATED MAGNIFIER W/BATT HAND HELD
$24.00
12650
Carrying Case For P-A-T Kit Compl W/Foam
$39.00
12647
Scrub Brush For PAT Adhesion Kit
$14.00
12649
D-3359 ASTM Reprint
$18.00
Join our Email List. subscribe
CANCEL