+1 (954) 946-9454

Teknimek Rub Tester

Article No. 10092

Teknimek Ink Rub Tester Complete 110v

The Teknimek Rub Tester (formerly known as Mickle) provides a simple and accurate method of determining the rub and abrasion resistance of inks printed on a variety of materials. It will also assess the comparative transfer between surfaces, and has been designed to conform to BS 3110:1959.

$5,562.00 excl. taxes & shipping cost

Features

  • Simple and accurate method of determining the rub and abrasion resistance of inks printed on a variety of materials
  • Assess the comparative transfer between surfaces
  • robustly constructed will provide many years of reliable service

Technical Attributes

  • Data
    Rubbing Block:4" x 2" (10 x 5cm), with 2 pads 2" x 1" Weight 2 lbs
    Fixed Platen:8" x 3" (20 x 7.5cm)
    Number of Strokes:1-99999
    Stroke Length:2.25" (6.5cm)
    Dimensions:40 x 24 x 23.5 cms
    Rating:100-120 volts 60Hz 1.5A / or 220-240 volts 50Hz 1A
    Additional Weight:2 lbs
    Stroke Speed:47 cycles/min
    Stroke Radius:9" (22.5cm)
    Weight:13.2kg

Standards

Conforms to BS 3110:1959

Procedure

  1. Cut the specimens to the required sizes using the two templates provided.
  2. Clamp the printed specimen to the platen and the plain specimen to the rubbing block, making sure they are dust free.
  3. Locate the rubbing block on the rocking arm and add the additonal weight to the block if required. (If it is not needed this weight can be stored in its locating hole at the back of the rocking arm).
  4. Set the number of cycles required on the numerical control and switch on.
  5. When the test has finished, remove the two strips for analysis.

Delivery Content

Rub Tester, rubbing block, additional weight and two cutting templates.

Accessories

10093
Rubbing Block For Teknimek Rub Tester
$572.00
Join our Email List. subscribe
CANCEL