+1 (954) 946-9454

FMP FD13H Probe

Article No. 11123

Fischer FD13H FMP Probe, Fe/NF Dual

The FD13H Probe is used with the Fischer FMP Dry Film Thickness Gauge. It is a plug-in cabled probe for measuring coating thickness on almost any metal.

$1,158.00 excl. taxes & shipping cost

Features

  • Plug-in cabled probe for measuring coating thickness with magnetic induction and/or eddy current methods. Because this probe uses two measurement methods, it is able to determine coating thicknesses on both non-ferrous (NF) and magnetizable metals (Fe).
  • With robust, 10-pin jack. Spring-loaded measuring element with built-in hard metal probe tip.
  • Can be connected to the following instruments: All DUALSCOPE® handheld devices of the FMP series as well as the FISCHERSCOPE® MMS® PC2 with the F-module PERMASCOPE®
  • Areas of application: Coatings of paint, lacquer , rubber or plastic on steel, iron or cast iron (Iso/Fe) or layers of chrome or copper on steel or iron (NF/Fe). For both galvanized and hot-dip galvanized coatings on steel, iron or cast iron(NF/Fe).

Technical Attributes

  • Data
    Measurement Range:

    0 – 2000 µm (0 – 80 mils) (NF/Fe) 0 – 2000 µm (0 – 80 mils) (Iso/NF)

    Cable Length:1.5 m

Delivery Content

Includes 2 sets of calibration foils, attachable prism, Fe and NF base. In order to function as a complete measurement system, this probe requires a Fischer measuring instrument.

Join our Email List. subscribe
CANCEL