|
|
 |
Viscosity Related ASTM Standards for Roational Viscometry |
Viscosity measurement is also a topic of numerous international standards. These standards ensure that there is a mutual understanding of test methods and quality between suppliers and buyers. The following list gives an overview of the test methods specified by ASTM for viscosity measurement:
- C474 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
- C965 Practices for Measuring Viscosity of Glass Above the Softening Point
- C1276 Standard Test Method for Measuring the Viscosity of Mold Powers Above their Melting Point Using a Rotational Viscometer
- D115 Methods of Testing Varnishes Used for Electrical Insulation
- D562 Standard Test Method for Consistency of Paints Using the Stormer Viscometer
- D789 Test Methods for Determination of Relative Viscosity, Melting Point, and Moisture Content of Polyamide (PA)
- D803 Standard Test Methods for Testing Tall Oil
- D1074 Test Method for Compressive Strength of Bituminous Mixtures
- D1076 Specification for Rubber-Concentrated, Ammonia Preserved, Creamed and Centrifuged Natural Latex
- D1084 Test Methods for Viscosity of Adhesives
- D1337 Test Method for Storage Life of Adhesives by Viscosity and Bond Strength
- D1338 Practice for Working Life of Liquid or Paste Adhesives by Viscosity and Bond Strength
- D1417 Methods of Testing Rubber Latices-Synthetic
- D1439 Methods of Testing Sodium Carboxymethyl-cellulose
- D1824 Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates by Brookfield Viscometer
- D1986 Test Method for Determining the Apparent Viscosity of Polyethylene Wax Brookfield Viscometer
- D2196 Standard Test Methods for Rheological Properties on Non-Newtonian Materials by Rotational Viscometer
- D2243 Test Method for Freeze-Thaw Resistance of Waterborne Coatings
- D2364 Standard Methods of Testing Hydroxyethyl-cellulose
- D2556 Test Method for Apparent Viscosity of Adhesives Having Shear Rate Dependent Flow Properties
- D2669 Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)
- D2983 Standard Test Method for Low-Temperature Viscosity of Automotive Fluid Lubricants Measured
- D3236 Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
- D3468 Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing
- D3716 Standard Test Methods for Use of Emulsion Polymers in Floor Polishes
- D3730 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
- D3791 Standard Practice for Evaluating the Effects of Heat on Asphalts
- D3794 Guide for Testing Coil Coatings
- D3806 Standard Test Method for Small-Scale Evaluation of Fire-Retardant Paints
- D4016 Standard Test Method for Viscosity of Chemical Grouts by the Brookfield Viscometer
- D4143 Standard Guide for Testing Latex Vehicles
- D4212 Standard Test Method for Viscosity by Dip- Type Viscosity Cups
- D4280 Standard Specification for Extended Life Type, Raised, Retroreflective Pavement Markers
- D4402 Standard Test Method for Viscosity Determinations of Asphalts Using a Rotational Viscometer
- D4712 Guide for Testing of Industrial Water- Reducible Coatings (withdrawn 2017)
- D4800 Standard Guide for Classifying and Specifying Adhesives
- D4878 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
- D4889 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
- D5018 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
- D5133 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- D5146 Standard Guide to Testing Solvent-Borne Architectural Coatings
- D5324 Standard Guide for Testing Water-Borne Architectural Coatings
- D5400 Standard Test Methods for Hydroxypropyl cellulose
- D6080 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
- D6083 Specification for Liquid Applied Acrylic Coating Used in Roofing (withdrawn 2014, no replacement)
- D6267 Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
- D6373 Standard Specification for Performance Graded Asphalt Binder
- D6577 Standard Guide for Testing Industrial Protective Coatings
- D6895 Standard Test Method for Rotational Viscosity of Heavy-Duty Diesel Drain Oils at 100°C
|
|
|
|