+1 (954) 946-9454

EasyTrack 3 Profiling System

Article No. 13464

Easytrack Std 6 Channel, Patch Probes

  • Easytrack Standard
  • 6 Channel
  • Comes with Patch Probes

Pricing shown for Domestic Sales only - please call for pricing outside the US.

Select your model

$6,547.00 excl. taxes & shipping cost

Features

The DATAPAQ ET3 Data Logger guarantees accurate temperature profiling and is designed with the easy two-button operation. Improved logger memory of x3 permits the profile detail your coating process demands (0.5 sample interval = 2.5 hours run). A battery life is improved x2.5 over the previous EasyTrack2 logger. Performing safely in up to 85°C/185°F, the plastic cool-touch case allows safe and comfortable handling even after the most demanding runs. Supplied with onboard calibration certificate, the ET3 temperature logger provides complete traceability to comply with QA standards. Send the DATAPAQ EasyTrack3 system through your oven and measure the product and oven temperature to guarantee that the correct time at temperature is achieved to give you the correct thermal coating cure.

  • The professional thermal barrier is designed for more demanding powder coating processes where multiple runs back to back are necessary to complete the profiling task in limited time. It confidently provides 2 hours protection at 200°C/392°F. With weight of only 3kg/6.5 lbs and height of 110mm/4.3 in, it’s easy and safe for transportation.
  • Two choices of software available. Both software versions allow to confirm that cure temperatures meet paint manufacturers’ specifications, make comparisons probe-to-probe, identify that the Datapaq® values fall within an acceptable tolerance range and evaluate process parameter changes. With a simple click of the mouse, you can print out a profile report that will satisfy all necessary regulatory requirements.
    • Standard EasyTrack Insight
    • EasyTrack Insight Professional
      • Multiple run and SmartPaq operation
      • Provides enhanced analysis and reporting platform allowing a professional coating suppliers to offer efficient service to their customers.
  • Power Single user-replaceable with locally sourced 9V battery. Battery life optimization through intelligent power management and auto power down. USB logger powering on reset & download (50 x 1 hour runs).
  • It features an auto logger detect, on-board calibration data, a remote service diagnostics tool and slope markers.
  • DATAPAQ EasyTrack3 calibration certificate stored on-board allowing full traceability of equipment and each run to the last calibration data.
  • Perform MultiRun (professional software), allowing up to 3 sequential separate runs without need to download between ovens, saving time and effort. Download each run as a separate result file.
  • Cold touch polycarbonate case designed to take knocks in the plant withstanding up to 212 °F (100 °C) without damage or distortion. Coated electronics to eliminate moisture damage even in humid working environments.
  • Non-volatile memory, allowing up to 2.5 hours of profile runs with a sample interval of 0.5 s, giving the resolution you need to make confident decisions. No risk of data loss even after battery replacement.
  • Magnetic probes attach to barrier top plate for ease and safety when handling.
  • Comprehensive range designed for accuracy, ease-of-use and durability for your industrial applications. Measure with confidence. Specified to (ANSI MC96.1 ±0.4 % or ±2.0 °F [1.1 °C])
  • Cold junction compensation guarantees logger accuracy over entire logger operating range up to 185 °F (85 °C). Accuracy guaranteed from start to finish of a run or day.
  • Lockable handle ensuring secure hanging on paint line. Lockable barrier clips eliminate risk of lid loss even when accidents happen.
  • Heatsink phase change provides optimal thermal protection when you need it. Logger auto-shutdown above 185 °F (85 °C) to prevent damage or risk of inaccurate data collection.
  • Running a profile is as simple as press "green" to start and "red" to stop, and any line operator can use it with ease and without risk
  • Applications: custom coaters "job shops", coating suppliers, oven manufacturers, general industrial, automotive component supply, architectural coating, textile coating, wood coating, consumer goods, domestic appliance, metal packaging, high temperature coating, specialty coatings
  • Can be configurated with any probes that are required for your specific application, call for more information

Technical Attributes

  • Data
    Application/Use:Budget option for general paint and powder
    Insight Software:EasyTrack
    Thermal Barrier:2 hrs @ 200°C (392°F)
    Probes:Patch
    General Information
    Channels:4 or 6 thermocouple options
    Measurement Range:-238 to 932°F (-150 to 500°C)
    Thermocouple Type:K (mini-plug)
    Logger accuracy±0.9°F (±0.5°C)
    Cold Junction Compensation:Accuracy guaranteed with change in logger temperature
    Resolution:±0.2°F (±0.1°C)
    Logger Operating Range:32 to 185°F (0 to 85°C) with safe auto shut down
    Case:High temperature cool touch molded polycarbonate <212°F (100°C)
    PCB:Coated to improve moisture protection
    Sampling Interval:0.5 s to 60min
    Start Trigger:Auto start/ start button / temperature trigger
    Battery Use:Replaceable 9V alkaline (ANSSI/NEDA 1604A IEC6LR61)
    Battery Life:Min 360 hours continuous operation - 5 s, 6 channels 77°F (25°C)
    Min 50x1 hour oven runs - 5 s, 6 channels at 158°F (70°C)
    Memory:18.000 readings per channel per run (0.5 s sample interval = 2.5 hours run time). Non volatile hot data protection.
    On Board Calibration Data:Digital certificate
    On Board Logger LEDs:Logger & battery status indication
    On Board Logger Diagnostics:Service email for logger health check
    Logger USB Power:No battery discharge on reset & download
    Auto Logger Detection:Auto boot up when logger detected by Insight™ software
    Multiple Run Capability*:Max 3 runs separately stored in logger
    SmartPaq*:Intelligent logger profile run "pass/fail" indicator
    Computer Interface Cable:CI1150 mini-B USB connector
    Hardwired Telemetry:via USB cable
    Software Compatibility:EasyTrack Insight (V8.50); EasyTrack Insight Professional (V8.50)
    Windows Compatibility:32 and 64-bit versions of Windows® XP, Vista, 7, 8, 10
    Logger Dimension (lxwxh):170 x 67 x 20.5mm (6.7 x 2.6 x 0.8 in)
    Replaces:EasyTrack; EasyTrack2
    Logger Weight:4 Channel - 196 g (0.43 lbs); 6 Channel - 200 g (0.44 lbs)
    Probe Options
    Surface Clamp:(Maximum temperature reading of 510°F/265°C) - These probes are designed for surface contact on ferrous or non-ferrous substrates, specifically aluminum. They are constructed of stainless steel throughout with a Teflon sheathed PTFE insulated ten strand wire. The self adjusting swivel jaws ensure correct sensor alignment on substrate thickness from 0.04 to 0.9 in. (1.0mm to 24.0mm).
    Ambient Air Clamp:(Maximum temperature reading of 510°F/265°C) - These probes are designed specifically for measuring ambient air temperature. They are constructed with a stainless steel outer tube with a Teflon core, stainless steel clip and an exceptionally durable, quadruple wrapped, ten strand PTFE coated wire.
    Magnetic Surface:(Maximum temperature reading of 510°F/265°C) - Small, yet extremely strong, these new probes give accurate and repeatable temperature readings in the tightest of recesses. with a 0.7” (17mm) footprint, state-of-the-art magnets, and an easy to grasp aluminum handle.
    Magnetic Ambient Air:(Maximum temperature reading of 510°F/265°C) - These probes are designed specifically for measuring ambient air temperature. They are constructed with a stainless steel outer tube, and an exceptionally durable quad wrapped, 10 strand PTFE coated wire.
    MicroMag Surface & Air:With a 17mm (0.7”) state of the art Samarium Cobalt magnet, low thermal mass and an easy to handle aluminum knob, the MicroMag can be quickly and efficiently attached to ferrous substrates. Despite its compact size, the magnet strength guarantees secure attachment at the highest temperatures experienced within the paint and powder coating industry. The MicroMag is useful in extremely tight places.
    Rapid Response Heavy Duty Patch:These probes are recommended for non-ferrous substrates such as plastic or aluminum. The welded thermocouple junction allows for a rapid response time of 1 sec. They are attached to the test piece by spot-welding, soldering or use of high temperature tape. These probes can also be used in still air environments as a rapid response ambient air probe.
    * Requires Insight Professional software

More Information

Applications - Custom coaters "job shops", Coating suppliers, Oven manufacturers, General industrial, Automotive component supply, Architectural coating, Textile coating, Wood coating, Consumer goods, Domestic appliance, Metal packaging, High temperature coating, and Specialty coatings

EasyTrack Insight Software - The EasyTrack3 temperature profiling system comes with two choices of software; standard EasyTrack Insight or the new EasyTrack Insight Professional version.

Both software versions allow to confirm that cure temperatures meet paint manufacturers’ specifications, make comparisons probe-to-probe, identify that the Datapaq® values fall within an acceptable tolerance range and evaluate process parameter changes. With a simple click of the mouse, you can print out a profile report that will satisfy all necessary regulatory requirements.

In addition, the Professional software package unlocks some new key features of the ET3 datalogger, such as multiple run and SmartPaq operation. It also provides an enhanced analysis and reporting platform allowing a professional coating suppliers to offer efficient service to their customers.

Thermocouples/Probes - The EasyTrack3 system is offered with a comprehensive range of thermocouples to suit every application and product type - from universal exposed junction probe which can be taped directly to any product or material type to a compact designed Micromag probe attaching quickly directly to your steel product.

Thermocouple range offers accuracy and reliability. Quad wrapped, 10 Stand PTFE and metal braid coated type K thermocouples designed with circular cross section to reduce kinking and strong crimped plug cable attachment. Specified to ANSI MC96.1 special limits of error ±0.4 % or 1.1 °C (2.0 °F). PTFE cables are rated up to 265 °C (509 °F). Cables quoted 1.5 m (6 ft) but available in variety of lengths.

The probe is further improved by a stronger 'crimped' plug/cable attachment and a circular cable cross section to reduce kinking and twisting. The green color of the cable conforms to the IEC584 color standard for Type K thermocouples.

Delivery Content

6 channel Data Logger, Thermal Barrier with Heat sink, EasyTrack InsightSoftware, 2 9V Batteries, Manual, Quick Reference Guide, 6 Heavy Duty Patch Probes with 5' Cable

Join our Email List. subscribe
CANCEL