ABOUT PRODUCTS RESOURCES QUOTES/ORDERING  
1-800-762-2478   Facebook  Twitter 


 Abrasion
 Adhesion
 Application
 Color/Gloss
 Density
 Dispersion
 Drum Handling
 Drying Time/Gelation
 Film Flaws
 Film Thickness
 Hardness
 Impact & Flexibility
 Lab Apparatus
 Measuring Instruments
 Moisture/Air/Temp.
 Optical Instruments
 pH & Conductivity
 Publications
 Surface Profile
 Surface Tension
 Viscosity
Home  >>  Products  >>  Moisture/Air/Temperature  >>  CureView Gradient Oven
CureView Gradient Oven

For performing thermal tests and simulations on samples for the evaluation of among other things, thermal stability, flow behavior, chemical resistance and sample preparation for further testing.

ISO 2812-5 Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method.

MFFT Bar

The CureView Gradient Oven is a flexible oven that allows the user to heat up test panels on a glass bed to a variety of temperature profiles, varying from ambient 41°F - 662°F (+5°C to 350°C). Elevated temperatures are instantly generated by 32 spectral filtered IR halogen heaters, which can be controlled individually and allow the setting of any form of temperature gradient, varying from a parabolic shaped gradient, an ascending or descending slope or a number of temperature blocks.

The CureView Gradient Oven allows importing of gradient profiles, measured by the CurveX oven logger system in order to simulate the production process on laboratory scale.




FEATURES TECHNICAL DATA MORE INFO PRICE LIST
 

 

Features

top
  • Easy-to-use Start/Stop operation
  • Buzzer acoustic feedback
  • Emergency stop
  • Gradient Oven Control software setup
  • Automated test panel transport
  • Pre and post cooling
  • 32 channel gradient heating and sampling
  • Ideal Finish Analysis of data
  • CurveX oven logger data import
  • Easy test panel spot analysis
  • Panel visible during test

 

Technical Data

top
Technical Data
Panel Carrier Transport Speed: 0.53 in/s (13 mm/s)
Panel Clamp Speed: 0.12 in/s (3 mm/s)
Max. Panel Width: 3.86 in (98 mm)
Max. Panel Length: 22.44 in (570 mm)
Max. Panel Thickness: 0.05 in (1.25 mm)
Dimensions and Weight
Depth x Width x Height: 23.43 x 29.92 x 11.65 in (595 x 760 x 296 mm)
Net Weight: Approx. 92.6 lbs (42 kg)
Basic Unit Power Supply: 220-240 V / 50 - 60 Hz (single phase / split phase)
Power Consumption: 2700 Watt (max.)
Safety: Emergency Button, Thermal Fuses, Integrated Acoustic Alarm
Function: Start and Stop button control
Temperature
Controller Accuracy: 3.38F (0.1°C)
Time Control Accuracy: 0.1 s/h
Heated Accuracy: 37.4°F (3°C)
Range: Ambient 41°F - 662°F (+5°C to 350°C) max.
Ramp (1 mm thick aluminium): 16.9°F (0.5°C) /s min.
Gradient: 37.4°F (3°C) /heater max.

 

Operation

top
The TQC CureView Gradient Oven has a three button controlled and software configurable running operation.

 

Applications

top
  • Coating industry
  • Industrial finishing
  • Laboratory
  • Detergent industry
  • Automotive

 

Special Care

top
  • Always clean the instrument after use.
  • Clean the instrument using a soft dry cloth. Never clean the instrument by any mechanical means such as a wire brush or abrasive paper. This may cause, just like the use of aggressive cleaning agents, permanent damage.
  • Do not use compressed air to clean the instrument.
  • Never perform repairs or service to the instrument yourself.

 

Safety Precautions

top
  • Always make sure the instrument is connected to an earthed socket.
  • Maintenance and inspection should be carried out at the correct intervals.
  • Operating personnel should be informed before starting with maintenance or repair work.
  • Always make sure the instruments power is turned off and the instrument is not connected to a socket while adjusting any electrical component whenever maintenance, inspection or repair work is done.
  • Do not open the instrument. In case of malfunction always consult the manufacturer

 

Disclaimer

top

The right of technical modifications is reserved. The information given in this sheet is not intended to be exhaustive and any person using the product for any purpose other than that specifically recommended in this sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk. While we endeavour to ensure that all advice we give about the product (whether in this sheet or otherwise) is correct we have no control over either the quality or condition of the product or the many factors affecting the use and application of the product. Therefore, unless we specifically agree in writing to do so, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage (other than death or personal injury resulting from our negligence) arising out of the use of the product. The information contained in this sheet is liable to modification from time to time in the light of experience and our policy of continuous product development.

 

Prices

top
Prices subject to change    Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only    Export orders require quotations - click here for a quote     For more info call us 1-800-762-2478 or 954-946-9454.
Item Number Item Prices

Gradient Oven, Laptop with Gradient Oven Control and Ideal Finish Analysis software, USB cable, Power cord and Manual
TE-800010 TQC CureView Gradient Oven $39,500.00
Accessories
TE-800031 CureView Gradient Oven Test Panels, set of 50 pcs 425.00
TE-800043 CureView ISO 2812-5 Panel Adapter, suitable for Holding Panels size 500 mm x 100 mm 285.00



top

Call HAVE QUESTIONS?
    1-800-762-2478
Email PREFER TO EMAIL?
    gardner@gardco.com
  FIND PRODUCTS LEARN MORE ORDERING INFO ABOUT US
  By Category Email Registry How to Order Contact Info
  By Industry Trade Shows Request Quote History
  New Products Test Lab Info Order Form FAQ's
  Monthly Product Articles/Links Sales & Clearance Policies




  © 2019 Paul N. Gardner Company, Inc. | Contact | Policies Facebook  YouTube  Blogger