|
|
 |

|
The Pundit PL-200PE employs state-of-the-art pulse
echo technology to extend the ultrasonic application to
objects where access is restricted to a single side.
The measurement process is greatly assisted by
innovations such as advanced echo tracking and
automatic estimation of Pulse Velocity. The A-Scan
Mode allows direct analysis of the raw signal and the
real-time B-Scan Mode provides a cross-sectional
view perpendicular to the scanning surface. The Area
Scan enables slab thickness uniformity testing in grid
patterns.
This allows the user to determine the slab thickness
and to localize subsurface deformities such as voids,
pipes, delaminations and honeycombing. Control buttons and optical feedback directly on the
probe increase measurement efficiency to make the
instrument even more user-friendly. |

|
Features
|
 |
- Single side determination of slab thickness
- Detection and localization of voids, pipes, delaminations and honeycombing
- Advanced echo tracking technology helps identifying the main echo
- Area Scan for slab thickness uniformity testing in grid patterns
- Measure variations in tunnel lining thicknesses according to RI-ZFP-TU
- Control buttons and optical feedback directly on the probe increase measurement efficiency
- Automatic estimation of the Pulse Velocity
- Easy B-Scan measuring through center marker and rulers directly on the probe
- Dry-contact transducer: no couplant required, suited for measuring on rough surfaces
- Lightweight and ergonomical handling
- Expandable with Pulse Velocity transducers
|
Technical Data
|
 |
Technical Data |
Range: |
0.1 - 7930 µs |
Resolution: |
0.1 µs (< 793 µs), 1 µs (> 793 µs) |
Display: |
7" colour display 800x480 pixels |
Pulse Voltage UPV: |
100 - 450 Vpp |
Pulse Voltage UPE: |
100 - 400 Vpp |
Bandwidth: |
20 - 500 kHz |
Receiver Gain: |
1x -10,000x (0 - 80dB) [11 steps] |
Memory: |
Internal 8 GB Flash memory |
Regional Settings: |
Metric and imperial units and multi-language supported |
Battery: |
Lithium Polymer, 3.6 V, 14.0 Ah |
Battery Lifetime: |
> 8h (in standard operating mode) |
Operating Temperature: |
0°C - 30°C (Charging, running instrument)
0°C - 40°C (Charging, instrument is off)
-10°C - 50°C (Non-charging) |
Humidity: |
< 95 % RH, non condensing
|
IP Classification: |
IP54 |
Applications
|
 |
Pulse Echo:
Single side access
Assessment of Concrete Quality
Ultrasonic Pulse Velocity
Uniformity
Slab thickness from a single side
Detection and localization of voids, pipes,
cracks (parallel to surface), and honeycombing
Scan Modes
A-Scans
B-Scans
Area Scan |
Accessories
|
 |
- 50 kHz Pulse Echo Transducer - The Pulse Echo transducer is a shear wave transducer designed for single-handed and two-handed operation. It is particularly suited to testing where access is limited to a single side.
- Standard 54kHz Transducer - A new design with improved performance to increase range and stability.
- 150kHz Transducers - These transducers have more resolution, but a decreased range. For use on fine grained samples.
- 250kHz Transducers - These transducers have more resolution, but a decreased range. For use on fine grained samples.
- 54kHz Exponential Transducers - For use on rough surfaces without couplant. When used in combination with Pundit Lab+ no external amplifier is required.
- 500kHz Transducers - For use with fine grained materials, such as rock and ceramics.
- 250kHz Shear Wave Transducers - For use in combination with standard P-wave transducers to measure the dynamic elastic modulus of the material under test.
- Transducer Holder - Particularly useful for compound measurements such as surface velocity or crack depth.
|
Prices
|
 |
 |
 |
Prices subject to change Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only Export orders require quotations - click here for a quote For more info call us 1-800-762-2478 or 954-946-9454. |
|
Item Number |
Item |
Prices |

Pundit Touchscreen, Pundit Pulse Echo Transducer incl. Cable, Contact Tester, Battery Charger, USB cable, DVD with Software, Documentation, Carrying Straps and Carrying Case< |
 |
|
WT-850401 |
Ultrasonic Pulse Echo Pundit PL-200PE |
$11,387.00 |
Accessories - Supplementary Transducers |
WT-850421 |
2 Transducers 24 kHz |
1014.00 |
WT-850423 |
2 Transducers 54 kHz |
1014.00 |
WT-850425 |
2 Transducers 150 kHz |
1014.00 |
WT-850427 |
2 Transducers 250 kHz |
1014.00 |
WT-850429 |
2 Transducers 500 kHz |
2,441.00 |
WT-850433 |
2 Exponential Transducers, 54 kHz, including Calibration Rod |
1,653.00 |
WT-850441 |
Pundit PL-200E UPV Kit including BNC Adapter Cable, 2x Cable with BNC- |
1,391.00 |
WT-850443 |
Pundit Pulse Echo Transducer, including Cable Contact Tester& Documentation |
5,268.00 |
WT-850445 |
Transducer Holder Complete |
441.00 |
|
|
|