Bransonic baths are in use worldwide, providing simple, effective results for the ultimate in ultrasonic cleaning.

Laboratory - Thoroughly removes blood, protein and contaminants on tools such as glassware, lenses, instruments and precision components.

Medical and Dental Labs - Offers a safer, more consistent way to clean dental and medical instruments in combination with sterilization.

Industry - Deep cleans to remove dirt, grease, waves, and oils from industrial parts and components of all kinds, including steel, light and nonferrous metals, plastic and glass.

Electronics - Completely removes flux and contaminants from such precision components as PC boards, SMDs, quartz crystals, capacitors and many others.

Jewelry - Thoroughly cleans and restores brilliance to watches, chains and charms, settings, coins, fine jewelry and clockworks.

Optical - Ensures precision cleaning of optics.

Beyond cleaning - Branson ultrasonic cleaners can also be used for sample preparation; degassing liquids, mixing and homogenization, dissolving solids, lysing and dispersion of particles.

• Sweep frequency eliminates standing waves and creates consistent cavitation throughout the tank.
  
  
• 40 kHz rugged industrial transducers.
  
  
• 99-minute digital timer and continuous ultrasonic operation.
  
  
• Can be heated up to 69°C/156.2°F and set for either Fahrenheit or Celsius.

• Degassing and conditioning the solution: The CPXH degassing period can be set up to 99 minutes. Extended degas time periods allow for "beyond cleaning" applications such as sample preparation, which includes degassing liquids, mixing and homogenization, dissolving solids, cell lysing and dispersion of particles.
  
• Ultrasonic power tracking: The new CPXH Series Bransonic control circuitry actively tracks the operating frequency of the bath and immediately brings the tank's frequency back to its optimum point. What this means to the end user is that the CPXH Series Bransonic bath will always deliver the same ultrasonic power without depending on the operator to make adjustments. The new CPXH Series Bransonic delivers unwavering cavitation, steady activity in the bath, even when the load conditions change.
  
• Programmable: The CPXH Series is completely programmable. Once the process is entered into the controller, the end user only has to start the program and they are free to leave the unit on its own to do the job. The programmable process allows the process engineer to choose the temperature set point at which the degassing and ultrasonic time periods are triggered to begin. Once the CPXH ultrasonic run time period is reached, the unit shuts off, delivering the same results - every time.
  
  • Automatic ultrasonic activation: When the process temperature reaches the programmable set point, the ultrasonic cycle begins. This includes selectable times for both degas and ultrasonic processing.
    
• High/low power control: When cleaning delicate parts, the CPXH allows the user to lower the amplitude of the acoustic energy in the bath: 100% power to the tank for normal applications, 70% power for delicate applications. Manipulating the output waveform in this manner greatly helps to avoid damage to the components in the bath during the ultrasonic process.
  
• Sleep mode: An energy-saving green feature. When the cycle is complete and no control keys are touched for 15 minutes, the CPXH unit goes into sleep mode. Touching any key on the controller causes the unit to come back on.
  
• High-temp safety alarm indicator for protection from unit overheating.
  
• Temperature calibration is user accessible through front panel.
  
• Controls are located above and behind the cleaning tank in an easily accessible control tower panel, and raised above the tank to avoid damage from cleaning solutions.
  
• Convenient built-in pour drains are featured on .5- and .75- gallon models. Tank drains with valves are incorporated on models 1.5-gallon and larger.
  
• Plastic body, chemical-resistant.

• Sweep frequency eliminates standing waves and creates consistent cavitation throughout the tank.
  
• 40 kHz rugged industrial transducers.
  
• 99-minute digital timer with continuous ultrasonic operation.
  
• Ultrasonic power tracking
  
• Degassing and conditioning the solution
  
• High/low power control
  
• Sleep mode

• Laboratories and dental offices
  
• Electronic components
• Industrial parts
  
• Jewelry and precious metals

Bransonic accessories are designed to maximize the effectiveness of your Bransonic baths. It is important that parts do not rest on the bottom of the bath, as it can inhibit the ultrasonic activity and possibly damage the unit.

A variety of perforated trays, mesh baskets, beakers and support racks give you the option of direct or indirect cleaning. All five models come with covers to allow the cleaning bath to heat up more quickly.

• Direct Cleaning Method
  
  • Suspends parts using a perforated tray, mesh basket, or a support rack.
    
  • Permits sound waves to penetrate directly to the parts.
• Indirect Cleaning Method
  
  • Suspends parts using a solid tray, or beakers with a beaker cover
    
  • Ideal for cleaning small parts.
  • Indirect method is ideal for sample preparation.
    
  • Discarded soil cleans easily from a beaker or solid tray.