All electric motors listed are for single phase 115-230 volt, 1750 rpm is standard electric. 1150 rpm is available. 300 to 3000 rpm is standard air. Extra propellers are available. TEFC models include cord, plug and switch. Explosion-proof models are equipped with motor leads only.

Totally Enclosed Fan Cooled (TEFC), Totally Enclosed Non-Ventilated (TENV), Explosion Proof (EP) and Air motors are standard. Horsepower ranges from 1/4 HP to 1-1/2 HP. 1725 RPM is standard electric. 1150 RPM is available. 300 to 3000 RPM is standard for air models.

Extra propellers are available. All electric motors listed are for single phase 110 volt, 60 cycle operation. All TEFC models include cord, plug and switch. Explosion-proof models are equipped with motor leads only.

Totally Enclosed Fan Cooled (TEFC), Explosion Proof (EP) and Air Motors are standard. Horsepower ranges from 1/2 HP to 4 HP. 1725 rpm is standard electric. 1150 rpm is available. 300 to 3000 rpm is standard for air models.

Extra propellers are available. All electric motors listed are for single phase 110 volt, 60 cycle operation. All TEFC models include cord, plug and switch. Explosion-proof models are equipped with motor leads only.

Totally Enclosed Fan Cooled (TEFC), Totally Enclosed Non-Ventilated (TENV), Explosion Proof (EP), and Air motors are standard. All single-phase TEFC models are equipped with cord, plug, and switch.

Explosion proof models come with motor leads only. On electric variable speed models, speed control is mounted on and prewired directly to mixer motor.

All units are easily portable and supplied complete. Standard shafts are stainless steel and propellers are 3-blade turbine impellers. Quic-change couplers are standard for fast, easy shaft removal. Electric Totally Enclosed Fan Cooled (TEFC), Totally Enclosed Non-Ventilated (TENV) and Air motors are standard; Explosion-Proof electronic motors optional. On electric variable- speed models, controller is mounted on and pre-wired directly to motor. Other motor types, speeds, and options are available, including different size shafts and propellers.

Our heavy duty direct drive mixers are engineered for mixing large volumes of light and medium materials or small batches of heavy materials. The heavy duty clamp mount allows 90° vertical and 360° horizontal adjustments for the most efficient mixing position. Clamp and motor mount are cast of aluminum for high strength and light weight. Propellers and shafts are stainless steel.

TEFC, Explosion Proof and Air motors are standard. Standard electric models have output speed of 1750 RPM. Variable speed electric models run from 35-1750 RPM, and Air models run from 300-3000 RPM. All single-phase TEFC models are equipped with cord, plug and switch. Three-phase and Explosion-proof models are equipped with motor leads only.

Provides a metal flange for mounting the mixer directly over the shaft hole in the tank cover or other flat surface. TEFC, Explosion Proof and Air motors are standard. All electric motors listed are for single phase 110 Volt, 60 cycle operation. TEFC models include cord, plug and switch.

Explosion-proof models are equipped with motor leads only. Other motor options and shaft lengths are available. Variable speed models available.

TEFC, EP and Air motors are standard. TEFC models include cord, plug, and switch. EP models are equipped with motor leads only. Other motor, shaft and impeller options are available.

Equipped with four casters (2 fixed and 2 swivel) for easy mobility. One set of casters has brakes for locking the stand in place.

Other sizes and configurations available by special order. Some assembly required. Mixers Not Included.

There are portable models available. Mixers are not included.

Standard features include 1/2 HP electric motors in ODP, TEFC, and EXPR, or 3/4 HP air motors. Electric units are wired for 115 volts, 60 HZ, and come with a cord and switch (M-2000EP has no plug). Output speed is 60 RPM on standard and explosion-proof units. Variable speed electric unit goes from 0-60 RPM and has speed controller mounted on motor.

Air model comes with speed control valve and muffler, and gives variable output speed between 0-100 RPM. All models have angle adjustment knobs which allow the mixer to go from a flat horizontal position to about 15 degrees. Paddle is zinc plated carbon steel. Pail not included.

Mix and dispense from the same 5-gallon pail! Our combined pail mixer features a lid-mounted motor and locking ring to securely hold the lid in place. The handle and side-mounted 3/4" dispensing valve make mobility and material transfer simple.

The PM-5 model is shipped with a painted steel pail. The 10" shaft attaches to the 5" 3-blade square pitch propeller with set screws and is constructed of 316 stainless steel. The 3/4 HP air motor model provides maximum power when supplied with 100 PSI @ 30 CFM. See our air motor performance guide for operation at lower air flow. The air valve provides speed control from 0-3000 RPM.

This model features a Gast air motor known for rugged construction and reliability. Air motors deliver variable speed for maximum flexibility or multiple applications. They are lighter weight than our electric models and reduce the possibility of explosion in a combustible environment.