Abrasion
 Adhesion
 Application
 Color/Gloss
 Density
 Dispersion
 Drum Handling
 Drying Time/Gelation
 Film Flaws
 Film Thickness
 Hardness
 Impact & Flexibility
 Lab Apparatus
 Measuring Instruments
 Moisture/Air/Temp.
 Optical Instruments
 pH & Conductivity
 Publications
 Surface Profile
 Surface Tension
 Viscosity
Home  >>  Products  >>  Application  >>  Vacuum Plates & Pumps

Drawdown Vacuum Plates



Features

top
These high quality drawdown vacuum plates are for use with wet film applicators and are machined from hard aluminum solid bar stock. They are black anodized which gives high durability along with corrosion resistance, this will increase wear and longevity of the vacuum plate. The top section of the plate has a series of holes. When attached by a hose connection to a vacuum pump or sink aspirator, the vacuum created will hold down paper draw down charts during application of wet coatings with any type of film applicator.

The DP-B2133 12x18 Aluminum vacuum plate has dual-zone capability. The vacuum can be isolated to the 9x12 area or the full 12x18 area can be used under vacuum. There are two ports on the side of the vacuum plate that select the two zones. If the 9x12 area is just required you would supply vacuum to one port, if the 12x18 area is desired you would use both. You have to apply vacuum to both ports to get the entire 12x18 area under vacuum. Included are 2 brass barbed fittings and a nylon Y fitting.

Each plate comes complete with hose fitting and rubber footing.

An optional chrome plated brass ball valve is available, this valve has an easy on/off lever handle to enable or disable vacuum. See below in accessories to choose the correct valve for each vacuum plate. Note the DP-B2133 requires two valves to control two ports/zones.


Prices

top
Prices subject to change    Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only    Export orders require quotations - click here for a quote     For more info call us 1-800-762-2478 or 954-946-9454.
Item Number Item Prices

All models - Hose fitting and rubber footing

DP-B2133 - Same as above, with Nylon Y FItting

DP-B3876 Drawdown Vacuum Plate, 9 x 12", black anodized, sealed (Vacuum plate Flatness Deviation no greater than 0.0001"/in) $551.00
DP-B2133 Dual-Zone Drawdown Vacuum Plate, 12 x 18", black anodized, sealed - (Vacuum plate Flatness Deviation no greater than 0.0001"/in) 1,122.00
DP-201612 Drawdown Vacuum Plate, 9 x 12", 303SS, Flatness Deviation no greater than 0.00008"/in. 2,095.00
DP-201618 Vacuum Plate, 12 x 18", 303SS, Flatness Deviation no greater than 0.00008"/in. (Single-Zone Only) 2,935.00
Accessories
DP-201515/ASSY01 Chrome plated brass ball valve (Designed to be Only used with Stainless Steel Vacuum Plates DP-201612 and DP-201618) 45.00
DP-B213305 Chrome Plated brass lever handle (1/8" NPT) (Only used with the 12 x 18 vacuum plate, requires 2) 25.00
DP-B387605 Chrome Plated brass lever handle (1/4" NPT) (Only used with 9 x 12 vacuum plate, requires 1) 27.00

 

 

 

Oilless Piston Type

Compressor/ Vacuum Pump Standard Duty*

Oiless Piston Vacuum Pump

Features

top
  • Quiet Operation
  • Economical aluminum construction stretches your budget money
  • Vacuum up to 27.6"
  • Free air displacement up to 1.6CFM (45LPM)
  • No water or oil needed to operate
  • Vacuum/pressure regulators and gauges
  • Water trap and muffler supplied
  • 1/8 HP

Prices

top
Prices subject to change    Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only    Export orders require quotations - click here for a quote     For more info call us 1-800-762-2478 or 954-946-9454.
Item Number Item Prices
VC-0111 Oilless Piston Type, Standard Duty Pump, 115V/60Hz, 26" Hg, 0.76 CFM $662.00
VC-0113 Oilless Piston Type, Standard Duty Pump, 230V/50Hz, 26" Hg, 0.76 CFM 662.00
VC-011705 Oilless Piston Type, Standard Duty Pump, 1/4 HP, 27.6 Hg, 1.6 CFM, 115V/ 60Hz 835.00
VC-011707 Oilless Piston Type, Standard Duty Pump, 1/4 HP, 27.6 Hg, 1.6 CFM, 230V/ 60Hz 835.00
VC-011911 Tygon Tubing with 5/16" inside diameter 2.00 per foot
*Not Recommended for pumping organic, acidic and basic vapors
Must order adapter DP-320191 for the Heated Perforated Vacuum Bed Models (free with purchase of above vacuum/compressor pumps)



top

Call HAVE QUESTIONS?
    954.946.9454
Email PREFER TO EMAIL?
    gardner@gardco.com
  FIND PRODUCTS LEARN MORE ORDERING INFO ABOUT US
  By Category Email Registry How to Order Contact Info
  By Industry Trade Shows Request Quote History
  New Products Test Lab Info Order Form FAQ's
  Monthly Product Articles/Links Sales & Clearance Policies




  © 2019 Paul N. Gardner, a BYK Instruments Company | Contact | Policies Facebook  YouTube  Blogger